CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   360 mopar oiling issue (https://classracer.com/classforum/showthread.php?t=70550)

CMcAllister 08-02-2018 12:50 PM
Re: 360 mopar oiling issue
 
I'm not sure, but they were small. .035 maybe. Slightly more for the heads. I wanted to get oil on the crank and keep it there instead of squirting off in other directions. A lot of oil will come through a .035 hole with 60 PSI behind it. .125" holes in the cam bearings is a number I've seen and that sounds way bigger than it needs to be. .125" x 4 is a big oil leak.

dondon 08-07-2018 10:56 PM
Re: 360 mopar oiling issue
 
dynoed new motor today, made 8 pulls. Pulled oil pan and number 3 rod bearing looked real nice. Happy for the time being.

GTSDart 08-08-2018 10:14 AM
Re: 360 mopar oiling issue
 
Quote:
Originally Posted by dondon (Post 569399)
dynoed new motor today, made 8 pulls. Pulled oil pan and number 3 rod bearing looked real nice. Happy for the time being.
Good to hear...

CMcAllister 08-08-2018 05:02 PM
Re: 360 mopar oiling issue
 
We used a System 1 filter. Made it pretty easy to tell what was going on. Easier than pulling the pan to look.


All times are GMT -4. The time now is 08:16 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.