CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Stock lifters (https://classracer.com/classforum/showthread.php?t=73816)

jmantle 09-11-2019 01:15 PM
Re: Stock lifters
 
Quote:
Originally Posted by MR DERBY CITY (Post 594413)
I DO race in Stock,...and I don’t want them....
There are a lot of older combos out there where aftermarket roller cams / lifters are not available and wouldn't be able to take advantage of the benefits, so much for a level playing field.

Jim Mantle V/SA 6632

Billy Nees 09-11-2019 04:50 PM
Re: Stock lifters
 
Quote:
Originally Posted by jmantle (Post 597340)
There are a lot of older combos out there where aftermarket roller cams / lifters are not available and wouldn't be able to take advantage of the benefits, so much for a level playing field.

Jim Mantle V/SA 6632
Hoo boy, Jim don't get me going.

Todd Hoven 09-12-2019 12:56 PM
Re: Stock lifters
 
Quote:
Originally Posted by Terry Cain (Post 594246)
Anyone think this will be the year when the ole flat tappet cars will get a early Christmas and roller lifters?
ohhhh NO!!

Todd Hoven 09-12-2019 12:59 PM
Re: Stock lifters
 
Quote:
Originally Posted by Terry Cain (Post 596133)
Tell that to the FS cars who are on the same Q sheet as the old cars. AND only 1 of those didn't make the program.
They are on the sheet and qualifying because of better parts and better technology. The lifters are a very small part of it. Keep Stock the way it is. If it came with it good, if not run what its supposed to have

Terry Cain 09-13-2019 11:27 AM
Re: Stock lifters
 
Quote:
Originally Posted by Todd Hoven (Post 597433)
They are on the sheet and qualifying because of better parts and better technology. The lifters are a very small part of it. Keep Stock the way it is. If it came with it good, if not run what its supposed to have
They are on the sheet BECAUSE they are underrated BECAUSE OF the parts and technology.

Greg Hill 09-13-2019 11:42 AM
Re: Stock lifters
 
If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.

Mike Savelle 09-13-2019 01:06 PM
Re: Stock lifters
 
Greg. how true ,we have to add 30%, thats why we run the combos with a roller cam crate motor

427FE 11-02-2019 10:26 AM
Re: Stock lifters
 
Quote:
Originally Posted by Greg Hill (Post 597519)
If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.
Is this absolutely necessary? Whats the next step down from this?

littlemanjoe 11-02-2019 12:07 PM
Re: Stock lifters
 
Quote:
Originally Posted by Greg Hill (Post 597519)
If you guys think roller lifters are too expensive try a billet cam with tool steel lifters with the proper coatings and break in.
Greg, do you see any gain going this why?
I'm looking at switching mine over now.


All times are GMT -4. The time now is 05:40 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.