CLASS RACER FORUM
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   4GC Air Cleaner base (https://classracer.com/classforum/showthread.php?t=44525)

dug283 02-18-2013 07:52 PM
Re: 4GC Air Cleaner base
 
Quote:
Originally Posted by FED 387 (Post 369759)
Thanx Philbilly---- I have a few left if anybody needs one ---FED387
Hi FED387,

email me at dug3119@yahoo.com

FED 387 02-18-2013 09:43 PM
Re: 4GC Air Cleaner base
 
anybody has any interest please email me @ rull2843@yahoo.com my PM box is getting full--FED387

philbilly 02-19-2013 09:25 AM
Re: 4GC Air Cleaner base
 
Fed I sent you some pics via email hope you get them. I would have posted here but dont really know how. you can post them up if you want.

FED 387 02-19-2013 10:25 AM
Re: 4GC Air Cleaner base
 
got em thanx

FED 387 02-19-2013 11:39 AM
Re: 4GC Air Cleaner base
 
OK --HOLD OFF on the bases for a second I have promises for all of them at this point --trying to get some more made up as we speak---will keep everyone informed---thank you for your interest---if you still want one please email me @ rull2843@yahoo.com and I will get back to you as to when more will be available-- Some have asked if these will fit a Holley/QuadraJet/Thermoquad-- carb--- I'm not making any promises but these are the measurements of the bases
14 inches ODof the pan
1 3/8 inches high maximum height of the pan
5 1/8 inches ID of the center hole in the pan
5 1/8 inches OD down to 4 7/32inches ID of the spacer that goes in the pan
approx 1 inch height of the spacer installed - so it raises the air pan up from the carb 1 inch
not sure if linkage/fuel inlets etc will fit other than a 4GC you will have to figure that out !!!
Thanx FED387

FED 387 02-19-2013 02:46 PM
Re: 4GC Air Cleaner base
 
OK---I will have more in stock end of next week-- ALSO for anybody that wants to use one of these on a Holley/ Quadra Jet/ Thermo Quad carb I have a limited amount of risers that will space the air pan up/off from the carb to clear any linkage fuel line problems that might arise---they are 5 1/8 inch inside diameter & they will be in 1/2 inch increments that is 1/2 high---1inch high ---1 1/2 inch high ---2 inch high---these will fit directly to the base plate and sit on top of the carb---Thanx FED 387

dug283 02-26-2013 09:17 AM
Re: 4GC Air Cleaner base
 
1 Attachment(s)
Received mine yesterday, can't wait to try it out in a couple of weeks. Thanks. :)

dug283 02-26-2013 09:26 AM
Re: 4GC Air Cleaner base
 
Quote:
Originally Posted by philbilly (Post 369736)
I made my first qualifing hit this week in gainsville without the base and my car went 7.54and a 12.12. On the second hit I installed the $40 base plate and my car went a 7.46 and 12.03. best 40 bucks i think i ever spent. I was having some issues with rpms so I was only going to the 1000 ft butThere is a solid tenth in the long track with one of these bases. This test was on my 283 chevy 2
Hi Philbilly, How did you secure it to your carb? Thanks

philbilly 02-26-2013 12:19 PM
Re: 4GC Air Cleaner base
 
I drilled four small holes at the position of the valve cover T. I zip tied at first but have carb springs that attach it. Seems to hold and easily removed

Jim Woods 02-26-2013 04:04 PM
Re: 4GC Air Cleaner base
 
Fed i tried to email , it keeps coming back , my mail is fastcars52@netzero.com thanks jim woods


All times are GMT -4. The time now is 06:21 PM.
Page 4 of 5 « First 23 4 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.