CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   396 big block in 1966-67 Chevy II ? (https://classracer.com/classforum/showthread.php?t=54081)

Geerhead55 07-24-2014 12:39 AM

Re: 396 big block in 1966-67 Chevy II ?
 
No Joe, I didn't miss the point, I got it. Theres never a shortage of guys that will tell us about these "ghost" combinations that were never offered by the factories,, like the thread about the 440 Dusters a few months back.
Rich: I remember on my '66 Nova SS, years ago, I had the Hooker fenderwell headers on my 331, and with my arms and hands being pretty good sized, I would reach underneath the headers from the front of the car to access the plugs. I ran some old 461x castings then, so I don't know if angle plug heads would've been any easier. It was just an accepted part of my routine back then. Wish I still had that car,, it was a fun ride.
Danny Durham

copperhead 07-24-2014 09:42 AM

Re: 396 big block in 1966-67 Chevy II ?
 
Quote:

Originally Posted by j smith 4115 (Post 438861)
i could be wrong but i think gm put the 396 big blocks only in the 66-67 chevy II convertibles. jim

So what's your point? lol

Not sure if this one is equipped with the Corvette fuel injection or the optional 396. :D

http://i226.photobucket.com/albums/d...ps2d468b7b.jpg

Jim Cimarolli 07-24-2014 10:02 PM

Re: 396 big block in 1966-67 Chevy II ?
 
Everytime I hear someone tell me about their 70 Chevelle SS LS6 454 that they once had. I always ask them if the car had factory A/C, 98% of them will say that it did.

Tom P 07-24-2014 10:31 PM

Re: 396 big block in 1966-67 Chevy II ?
 
My aunt had a 66 Acadian convertible, looked the white Nova above but red with red interior. She probably bought it that way and before 67. I would doubt she bought a hardtop and had it converted herself so perhaps a dealer did, maybe reskinned a crashed 65. It one upped my uncle who had a Volvo P1800 and my aunt (from other side of family) was proud of that.

Used to be a few big block Chevy II's around with fenderwell headers and stock suspensions. Making the headers fit inside the frame would be a challenge.

Troy Pourciau 07-24-2014 11:11 PM

Re: 396 big block in 1966-67 Chevy II ?
 
Quote:

Originally Posted by Rich Biebel (Post 439080)
My very good friend has a '67 Nova for over 30 years.

It is a small block and always has been.It was a C/SM car and originally a '66 run as a bracket car in the mid '70's

He is a pretty big guy and when he has to change spark plugs I usually call for an ambulance to sit on standby. Never fails to cut himself or burn himself and has the car jacked up just to get to a couple plugs.

My Lt-1 Firebird was not a whole lot better.....


I have a dragster and you can keep your Chevy II's, Nova's and Gen 4 F bodied cars....LOL

got a 94 LT1 camaro also. had my dad change the plugs in it once.... he said that he will NOT change the plugs again. LOL

njk53 07-25-2014 02:16 PM

Re: 396 big block in 1966-67 Chevy II ?
 
I am pretty sure the 67 Nova came with a 327 ci 350 horsepower option. A high school friend had one and a drunk blew a stop sign and T - Boned him and toatled it. Another friends brother has a factory 454 4 speed in either a 70 or 71 Monte Carlo which he bought new.

Joe Ogiba 07-25-2014 08:50 PM

Re: 396 big block in 1966-67 Chevy II ?
 
Quote:

Originally Posted by njk53 (Post 439329)
I am pretty sure the 67 Nova came with a 327 ci 350 horsepower option. A high school friend had one and a drunk blew a stop sign and T - Boned him and toatled it. Another friends brother has a factory 454 4 speed in either a 70 or 71 Monte Carlo which he bought new.

The 66-67 Nova with 350HP 327 was a popular combo since that was the first Bill Jenkins "Grumpy's Toy ".
http://www.nhrafinals.com/galleries/...tos/rsz_11.jpg
https://farm6.staticflickr.com/5587/...06238198_b.jpg

Run to Rund 07-26-2014 12:01 AM

Re: 396 big block in 1966-67 Chevy II ?
 
Wade, I believe that the way to get the cant-gettium 383 option (right next to the unobtanium options on the order form) was to specify the "hemi-delete" option.

treessavoy 07-26-2014 02:35 PM

Re: 396 big block in 1966-67 Chevy II ?
 
Quote:

Originally Posted by copperhead (Post 439166)
So what's your point? lol

Not sure if this one is equipped with the Corvette fuel injection or the optional 396. :D

http://i226.photobucket.com/albums/d...ps2d468b7b.jpg

This car was an export only release by Chevy, only 43 were made.

JimR

blkjack 07-26-2014 04:08 PM

Re: 396 big block in 1966-67 Chevy II ?
 
never saw one but here's another http://i5.photobucket.com/albums/y17...CN00940001.jpg


All times are GMT -4. The time now is 03:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.