CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   SS round two (https://classracer.com/classforum/showthread.php?t=65241)

Mike Graham 02-13-2017 10:00 PM

Re: SS round two
 
Quote:

Originally Posted by Cotten (Post 526937)
I have

THAT'S FUNNY.. Sad,but funny.

Larry Hill 02-13-2017 10:47 PM

Re: SS round two
 
I had a re-run at Indy points race, my competitor in B/SA dialed above the index and red lighted. We still had to race again, D-3 director said so and my guy red lighted again. Basis for the decision was all racers have to dial the index or quicker. Fact is if no dial in is on the window, the tower automatically put up the class index. Just like years ago, to be a class winner a racer had to run on or below the index to win class and put him in the "Show"

SStockDart 02-14-2017 12:23 AM

Re: SS round two
 
Quote:

Originally Posted by Larry Hill (Post 526946)
I had a re-run at Indy points race, my competitor in B/SA dialed above the index and red lighted. We still had to race again, D-3 director said so and my guy red lighted again. Basis for the decision was all racers have to dial the index or quicker. Fact is if no dial in is on the window, the tower automatically put up the class index. Just like years ago, to be a class winner a racer had to run on or below the index to win class and put him in the "Show"

I had Donna (my wife) check to be sure it was correct. She always brought me into the water box. Plus, I always thought "what can I do if the dial is wrong, when I am strapped in".???...yell?

jmcarter 02-14-2017 08:35 AM

Re: SS round two
 
Quote:

Originally Posted by Cotten (Post 526937)
I have

Yes but in showing the class you did you gained far more than you lost...

Mike Pearson 02-14-2017 09:14 AM

Re: SS round two
 
I got stung one time by a incorrect dial in in the computer. As others have said if you stage and run you have accepted the dial in for both cars. I will not pre stage until the dial ins are on the scoreboard. I check both just to make sure they are correct. It is seldom that there is an error. Good people working the computers in the tower. They deserve a thank you for a job well done.

Chuck Norton 02-14-2017 11:27 AM

Re: SS round two
 
Quote:

Originally Posted by MikeMoller (Post 526921)
I am bad about checking the posted dial, actually only looked once last year and it was wrong. Competitor also saw it, and it got fixed. I agree they should be able to catch it, but unfortunately humans are involved. That's why they pass the buck back to us. Hate you lost that way. NHRA avoids reruns if at all possible-haven't seen or heard of one in years.

Had one in about '98 at Sonoma national event. The second bulb on my side of the tree did not light. Went immediately to Lynwood D. in the tower. He and I walked out onto the track and he asked the starter if that was true. Starter (not Stewart) nodded "yes," and we re-ran the race.

c

colby 02-14-2017 02:04 PM

Re: SS round two
 
Former Compulink operator here
he computer will accept the dial but will highlight and blink showing there is a problem. It should have been caught.

Lenny5160 02-14-2017 02:47 PM

Re: SS round two
 
Quote:

Originally Posted by SStockDart (Post 526953)
I had Donna (my wife) check to be sure it was correct. She always brought me into the water box. Plus, I always thought "what can I do if the dial is wrong, when I am strapped in".???...yell?

When I get an incorrect dial, I open the door and point down at the scoreboards. I suppose you could point at the dial-in on your window or something as well.

Bob Mulry 02-14-2017 03:15 PM

Re: SS round two
 
Quote:

Originally Posted by colby (Post 526996)
Former Compulink operator here
he computer will accept the dial but will highlight and blink showing there is a problem. It should have been caught.



Does the index board that the driver sees blink???????????

If it only blinks in the tower that no help..........

Take the human out of the computer system by programing a fail safe into it........

Over index dial should be no display or blinking red anything to alert the driver of a problem...........

Maybe NHRA cutting back on the number of employees might have added to this problem?????

Just write some code and add it to the Compulink program....

Bobby DiDomenico 02-14-2017 05:05 PM

Re: SS round two
 
Quote:

Originally Posted by Mike Pearson (Post 526969)
I got stung one time by a incorrect dial in in the computer. As others have said if you stage and run you have accepted the dial in for both cars. I will not pre stage until the dial ins are on the scoreboard. I check both just to make sure they are correct. It is seldom that there is an error. Good people working the computers in the tower. They deserve a thank you for a job well done.

It has to be very tough entering all the dial ins for a day of racing, and I've missed an incorrect dial posted on the scoreboard myself not paying attention to what was out there. I must say I am surprised the software allows you to dial over the index, I always thought it would only allow less, not more. Now we know better.


All times are GMT -4. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.