CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   stock class rear axle? (https://classracer.com/classforum/showthread.php?t=76086)

Mark Yacavone 04-30-2020 05:04 PM

Re: stock class rear axle?
 
Quote:

Originally Posted by Don Carpenter (Post 613606)
If the previous statement is true, there are a lot of BOP and Cads out there with 12 bolts. Travis may be able to chime in on this. Or are all those cars not legal?

Don, I guess you are saying that at least one Cad had a 12 bolt. ;-) A lot ? Doubtful..some of the other 2-3 had 8.5's.

B-O-P are all covered for 12 bolts in the 70-72 era.

Alan Nyhus 05-02-2020 01:38 PM

Re: stock class rear axle?
 
Here's something to think about on Chevy rear ends:

-Some '82 Camaro's came with the Spicer (Dana) 44 rear axle.
-So a Spicer/Dana rear axle would be a 'Chevrolet' rear end.
-So if a Spicer/Dana is a 'Chevrolet' rear end (and we just proved it is ;))
-You should be able to legally use, oh...let's say...a Spicer/Dana 60 in any Chevrolet stocker.

I rest my case. :) -Al

Billy Nees 05-02-2020 02:56 PM

Re: stock class rear axle?
 
Alan, that might be a tough sell but yes, GM offered a Dana 44 rear as a "service package" replacement for an early 80s Camaro/Firebird with the 305 HO engine. Contrary to the NHRA Guide, the 305 HO was a stick only combo and they were constantly breaking the 7.5s. I have never nor do I know of anyone who has ever bought one over-the-counter but they were the replacement for warranty claims. I've had a couple of them over the years.

GUMP 05-02-2020 06:23 PM

Re: stock class rear axle?
 
I believe that the Dana 44 was factory installed in the early 1LE cars.

Alan Nyhus 05-02-2020 06:38 PM

Re: stock class rear axle?
 
Quote:

Originally Posted by GUMP (Post 613763)
I believe that the Dana 44 was factory installed in the early 1LE cars.

Correct! :) -Al

Dissident 05-03-2020 12:23 AM

Re: stock class rear axle?
 
Jeeps also used Dana 44 drive axle differentials.....I think AMC also used them. Chrysler owns Jeep....You do the politics.:rolleyes:

Regards,
HB2:)
Dissident

MR DERBY CITY 05-03-2020 01:46 AM

Re: stock class rear axle?
 
[QUOTE=Billy Nees;613757 Contrary to the NHRA Guide, the 305 HO was a stick only combo .[/QUOTE]

Say it ain’t so ..Billy.....

Alan Nyhus 05-03-2020 09:33 AM

Re: stock class rear axle?
 
This is an assembly line installed Dana/Spicer 44 rear in an '82 Z28:

https://i.imgur.com/ORcrkjtl.jpg

But back to Rod's question...why wouldn't you want to run a 12 bolt? -Al

james schaechter 05-03-2020 09:45 AM

Re: stock class rear axle?
 
Quote:

Originally Posted by MR DERBY CITY (Post 613789)
Say it ain’t so ..Billy.....

I remember the 1983 being stick only, but not sure on the other HO years. Maybe some folks out there would have to convert to a stickshift?

I recall NHRA pulling back the Baby LT combo to automatic only so it isn’t out of reach for NHRA to correct that 305 HO spec to stick only if warranted. ( I don’t know for sure either)

Billy Nees 05-03-2020 09:49 AM

Re: stock class rear axle?
 
Quote:

Originally Posted by Alan Nyhus (Post 613792)
This is an assembly line installed Dana/Spicer 44 rear in an '82 Z28:

https://i.imgur.com/ORcrkjtl.jpg

Well, I stand corrected.


All times are GMT -4. The time now is 09:32 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.