CLASS RACER FORUM
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Radial tires (https://classracer.com/classforum/showthread.php?t=83340)

Troy Henderson 11-11-2022 07:12 PM
Re: Radial tires
 
Quote:
Originally Posted by James Perrone (Post 670773)
Are you running a radials in the video?
Car leaves perfect
Yes sir

James Perrone 11-12-2022 10:53 AM
Re: Radial tires
 
Troy you must be the only guy running them
It’s has to be faster.
It’s been said a radial tire could be 1 tenths faster. Than a bias ply
Good job

427FE 11-13-2022 11:53 AM
Re: Radial tires
 
Quote:
Originally Posted by Troy Henderson (Post 670753)
Radials need to be dead hooked with even then increasing pressure right off the hit to work consistently. Basically just like an automatic car leaves. If your car pounds the bias tires hard to make it leave it may not be able to hook radials. Good shocks, sorted suspension and data logging go a long ways.

https://photos.app.goo.gl/mNJHBABXRNpW43cYA
Whos rear shocks do you use? Car leaves PERFECT

4284spd 11-13-2022 03:17 PM
Re: Radial tires
 
Quote:
Originally Posted by James Perrone (Post 670801)
Troy you must be the only guy running them
It’s has to be faster.
It’s been said a radial tire could be 1 tenths faster. Than a bias ply
Good job
Their is quite a few stick cars running them. Markus Svennson was testing them back in 2019.
https://live.staticflickr.com/65535/...aea1bb81_h.jpg94883672_116236470064783_6239002913033682944_o_116 236463398117 by Bob Smith, on Flickr

Troy Henderson 11-13-2022 10:02 PM
Re: Radial tires
 
Quote:
Originally Posted by 427FE (Post 670850)
Whos rear shocks do you use? Car leaves PERFECT
Fast shocks

Doug Domm 11-18-2022 12:11 AM
Re: Radial tires
 
What rpm difference is there at the top end between bias and radial with the same rollout for each?

Glenn Briglio 11-18-2022 07:54 AM
Re: Radial tires
 
Quote:
Originally Posted by Doug Domm (Post 671105)
What rpm difference is there at the top end between bias and radial with the same rollout for each?
150 to 200


All times are GMT -4. The time now is 03:04 AM.
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.