CLASS RACER FORUM - Original hemi dart information

A few shots of my 604 Hemi in position. Trying to figure out why the mezier water pump has such an odd angle to the output, and what kind of hose to use to connect it.

sure wouldn't work with a belt driven fan!!! Time to hit the parts store and look for something with the right bends and adjust the ends accordingly.

LO23	11-27-2017 09:35 PM

Re: Original hemi dart information

Quote:

Originally Posted by marfen (Post 550438)

sure wouldn't work with a belt driven fan!!! Time to hit the parts store and look for something with the right bends and adjust the ends accordingly.

Yep!

LO23	11-27-2017 09:37 PM

Re: Original hemi dart information

Quote:

Originally Posted by HEMIDARTDAVE (Post 550431)

That's the same plate that I have.

Yep. Wish mine was unmolested.

Mr.Hemidart

11-28-2017 02:20 PM

Re: Original hemi dart information

hello hemi dart`s fans, my 68`LO23 Dart is for sale in: Carsonline.com regards vali

Liteweight

12-01-2017 01:27 PM

Re: Original hemi dart information

Quote:

Originally Posted by Spyphish (Post 550321)

I just consigned it to BJ in Palm Beach for April. I need the location of the blue box system. I have the wiring diagram and see a few blank holes in firewall/inner fenders etc. I have the original kit just need help installing correctly if anyone can help. Who knows, this stuff may have been first to throw in trash back then. VALDEZ

Hey Phish

Finally had some time to go searching through my old NHOA newsletters. Found a pic from back in 1980. There's a good article on it with wiring diagrams if you need more

liteweight

BTW check out the very hard to find heater delete fresh air vent. That vent on a heater equipped car is part of the heater box assembly

.
https://image.ibb.co/czfPnw/20171125_182301_1.jpg

Liteweight

12-01-2017 03:37 PM

Re: Original hemi dart information

Quote:

Originally Posted by LO23 (Post 550427)

A few shots of my 604 Hemi in position. Trying to figure out why the mezier water pump has such an odd angle to the output, and what kind of hose to use to connect it.

Hey thanks guys for the radio/heater plate stuff. Much appreciated!!!

I know there's more guys out there with these things. I sure would like to see a few more. Comon guys, Step on up.................................

BTW LO23 Keep a close eye on your temp gauge with that motor using the oem style rad with that kinda hp. The alloy block and heads will help but the design of the original rad leaves alot to be desired. ie inlet and outlet on same side. This doesn't promote the coolant for complete core use.

liteweight

Liteweight

12-01-2017 03:47 PM

Re: Original hemi dart information

Heres a good shot of that hard to find little piece that is called the heater delete fresh air vent or box

liteweight

https://image.ibb.co/fWxOVG/20170822_213059_1.jpg

Liteweight

12-01-2017 04:14 PM

Re: Original hemi dart information

Clint
I tried using the original 033 rad, but it would not cooI. I then changed the top tank so the outlet of the rad was on the passenger side to promote flow across the entire core. Helped but still heated.

The end result is the biggest rad Be Cool makes to fit in a Big Block A Body without any cutting and 2 puller electric fans. The tanks have notches and fit above the frame rails. After all this, I still have to watch the gauge on hot days. But then again, I do street drive mine every chance I get. Even on those hot days

liteweight

https://image.ibb.co/mW4vAG/20141010_224206_1.jpg

https://image.ibb.co/jdvVcw/20170515_213546_1.jpg

Yes its tight

https://image.ibb.co/fFEvAG/20170515_213611_1.jpg

Liteweight

12-01-2017 04:51 PM

Re: Original hemi dart information

A couple more LO and BO specialty parts since we're on this subject:

Deep groove underdrive pulleys. Alternator pulley,crank pulley, and waterpump pulley
Aluminum stamped alternator brackets. Reproduction stuff is not stamped

liightweight

https://image.ibb.co/ew4Oxw/20170515_213627_1.jpg

Charlie A

12-01-2017 05:04 PM

Re: Original hemi dart information

Quote:

Originally Posted by Liteweight (Post 550809)

Heres a good shot of that hard to find little piece that is called the heater delete fresh air vent or box

liteweight

https://image.ibb.co/fWxOVG/20170822_213059_1.jpg

Daryl,
I am thinking I read somewhere back a couple hundred posts that these were also thought to be installed on the Mexico export Darts.
Maybe someone has a "south of the border salvage" connection?

All times are GMT -4. The time now is 05:18 PM.

Page 497 of 547

497

Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.