CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   new hp (https://classracer.com/classforum/showthread.php?t=30126)

Jeff Teuton 12-07-2010 10:26 PM

Re: new hp
 
We plan on storing #1, and racing #3. If the other guys who are getting No 1 thru 10 want to post, they can tell you who they are. Some very well known names.

The Hawk 12-07-2010 11:51 PM

Re: new hp
 
With the HP letters being sumitted and granted HP or being turned down,does anyone have an idea what NHRA looks at when making decisions? I know of one V6 FWD FI combo that`s been given back at least 25 HP in a span of about 6 or 7 years to be rated less than a carburated combo and go from being an uncompetitive car to being .40 under the new indexes and doing nothing to the car? I`ve written letters and got nothing,where some have submitted timeslips from a bracket race and received a HP reduction. Not looking for sympathy,just looking for answers to what NHRA looks at.

X-TECH MAN 12-08-2010 09:22 AM

Re: new hp
 
Quote:

Originally Posted by Lane M Weber (Post 226580)
With the HP letters being sumitted and granted HP or being turned down,does anyone have an idea what NHRA looks at when making decisions? I know of one V6 FWD FI combo that`s been given back at least 25 HP in a span of about 6 or 7 years to be rated less than a carburated combo and go from being an uncompetitive car to being .40 under the new indexes and doing nothing to the car? I`ve written letters and got nothing,where some have submitted timeslips from a bracket race and received a HP reduction. Not looking for sympathy,just looking for answers to what NHRA looks at.

They dont look at anything.....In case you havent noticed they are blind !

Dan Wilson 12-08-2010 09:59 AM

Re: new hp
 
A question to Jason.
The cam stayes the same lobe lift.
If the rocker ratio is increased from 1.60 to 1.65 will the valve lift
1. remain the same
2.decrease
3 increase

Dan

Chad Rhodes 12-08-2010 11:16 AM

Re: new hp
 
Quote:

Originally Posted by Dan Wilson (Post 226625)
A question to Jason.
The cam stayes the same lobe lift.
If the rocker ratio is increased from 1.60 to 1.65 will the valve lift
1. remain the same
2.decrease
3 increase

Dan

i know the answer, pick me!!!!!!!!

Jason 12-08-2010 11:27 AM

Re: new hp
 
Quote:

Originally Posted by Dan Wilson (Post 226625)
A question to Jason.
The cam stayes the same lobe lift.
If the rocker ratio is increased from 1.60 to 1.65 will the valve lift
1. remain the same
2.decrease
3 increase

Dan

A few questions for Dan.

The specs sent out for your engine in 19?? were what they were. Did the factory technican sending the specs back then know what your engine was built with? Would you like to have a new rocker arm ratio on your engine? If so just call the factory and see if you can get an increase on your engine's rocker arm ratio and cam lift.

I'm sure it would all be readily accepted!

Steve Polhill 12-08-2010 01:04 PM

Re: new hp
 
Quote:

Originally Posted by ALMACK (Post 226325)
That link shows the 1984 T-Bird/Cougar Turbo 2.3 rated @ a NEW 171 HP... ???

That's what is was factored to in April 2009 and is still in effect.....odd

The new HP is 174 the cloumns don't line up.

Crew Chief 12-08-2010 01:51 PM

Re: new hp
 
Quote:

Originally Posted by Jason (Post 226372)
You mean the factory sent the wrong specs out originally on both the rocker arm ratio and the cam lift? Yeah....Right!!!!!

The rocker arm ratio was a missprint in the original specs. It should have always read 1.65 to 1.

The cam lift should have remained the same as originally printed as it was not a missprint. The cam lift as originally printed has passed teardown because the engines were built to the old spec using 1.65 rockers.

DP racers got an early christmas present on the new cam lift.

X-TECH MAN 12-08-2010 02:01 PM

Re: new hp
 
Quote:

Originally Posted by Crew Chief (Post 226669)
The rocker arm ratio was a missprint in the original specs. It should have always read 1.65 to 1.

The cam lift should have remained the same as originally printed as it was not a missprint. The cam lift as originally printed has passed teardown because the engines were built to the old spec using 1.65 rockers.

DP racers got an early christmas present on the new cam lift.

A new Chritmas present ! They have recieved Santa's whole North Pole operation already.....LOL.

Jeff Teuton 12-08-2010 05:07 PM

Re: new hp
 
It's about time we got something. We been pooed on for years. And I am thankful to Santa Clause. I heard Santa also had some special facial creme that removes the Bowtie from the middle of the forehead. It's gonna be a long winter.


All times are GMT -4. The time now is 03:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.