CLASS RACER FORUM
Page 5 of 6 « First 34 5 6
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   DP rear axle assembly (https://classracer.com/classforum/showthread.php?t=48728)

Andys dad 08-17-2013 03:04 PM
Re: DP rear axle assembly
 
Quote:
Originally Posted by Mack Reeves (Post 395145)
Stewart, I looked this morning and it wasn't in the 2011 but it was in both the 2009 and 2010???? So who knows???? Stewart, I'm looking in the Stock Car Classification Guide.... The 426 is in both the 2009 and 2010 in Yellow and a note that says 8-15-13??
I mentioned earlier - it was the hood

2011 only had flat hood

2009-2010 had the scoop

Ron

Mack Reeves 08-17-2013 06:57 PM
Re: DP rear axle assembly
 
Quote:
Originally Posted by Andys dad (Post 395153)
I mentioned earlier - it was the hood

2011 only had flat hood

2009-2010 had the scoop

Ron
You are right there Ron.... But also the 09's and 10's had the v-8's and the 2011 had the V-10's... No V-8's in 2011.... Who knows... I have been told so many things since this started.... Guess we'll have to wait until Indy and just see.....

Dan Wilson 08-18-2013 09:24 PM
Re: DP rear axle assembly
 
The 426 is a upgrade of the 2009-2010 to a 2011 is what I was told , but now I am confused as is others. It is entered as a 2009 - 426. We started it up today and everything seems good except the windows stoped working . I guess they are not 426 compatible. Now we have to get them working. Will they not work with 16 volt? I converted it from 12v to 16v and they stopped working.

The 426 sounds real good.

Dan

Jeff Teuton 08-18-2013 09:44 PM
Re: DP rear axle assembly
 
Your 426 is an 11.

GUMP 08-19-2013 12:08 AM
Re: DP rear axle assembly
 
Quote:
Originally Posted by Jeff Teuton (Post 395317)
Your 426 is an 11.
Not according to the NHRA web site! Right now, it's confused.

Andys dad 08-19-2013 03:49 AM
Re: DP rear axle assembly
 
Quote:
Originally Posted by Dan Wilson (Post 395314)
The 426 is a upgrade of the 2009-2010 to a 2011 is what I was told , but now I am confused as is others. It is entered as a 2009 - 426. We started it up today and everything seems good except the windows stoped working . I guess they are not 426 compatible. Now we have to get them working. Will they not work with 16 volt? I converted it from 12v to 16v and they stopped working.

The 426 sounds real good.

Dan
Saw this problem in a build at Phil Mandella's I was involved with

It was somewhat related to the 12 to 16 conversion and manifested itself in mysterious ways - pretty sure the controller is "bunged"

Check with them (Phil or Tony) 909-941-7800 to obtain one which works

Andys dad 08-19-2013 03:52 AM
Re: DP rear axle assembly
 
Quote:
Originally Posted by GUMP (Post 395325)
Not according to the NHRA web site! Right now, it's confused.
The hood issue made them change - the combination could not be used in an 11 with a flat hood

09 + 10 hood works

IMHO - Good after thought

Ron

Jeff Teuton 08-19-2013 07:06 AM
Re: DP rear axle assembly
 
If you got a 426 Gen III from Arrow, either complete or unassembled, you will be rebadged as an 11. Originally it was to be a 13, but the final version was rebadged as a 11. The 426 has the new motor, scooped hood, and available 9 inch rear. All was to make a competitive shoot out car. The specs are almost identical to the 427 Copo motor. Now you have it.

denbreeden 08-19-2013 07:52 AM
Re: DP rear axle assembly
 
Quote:
Originally Posted by Dan Wilson (Post 395314)
The 426 is a upgrade of the 2009-2010 to a 2011 is what I was told , but now I am confused as is others. It is entered as a 2009 - 426. We started it up today and everything seems good except the windows stoped working . I guess they are not 426 compatible. Now we have to get them working. Will they not work with 16 volt? I converted it from 12v to 16v and they stopped working.

The 426 sounds real good.

Dan
My DP windows work fine on 16V. I did get rid of the factory "smart" switch and put new switches in.

Dennis Breeden

Billy Nees 08-19-2013 07:58 AM
Re: DP rear axle assembly
 
and to think that I was told by an NHRA Tech Official just this weekend that MY car is "destroying the integrity" of Stock Eliminator! Who'da thought!


All times are GMT -4. The time now is 01:47 PM.
Page 5 of 6 « First 34 5 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.