CLASS RACER FORUM
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Bellhousing (https://classracer.com/classforum/showthread.php?t=68143)

Ed Carpenter 01-14-2018 03:38 PM
Re: Bellhousing
 
Browell and never look back!

Dave Toce 01-15-2018 08:27 AM
Re: Bellhousing
 
Quote:
Originally Posted by james schaechter (Post 553701)
Did all of the bolt holes line up Or did you need to re drill some on the lower half?
The Quicktime part number 1/4" mid-plate I used is 6093, it is really only a spacer plate at the block upper half with mounting tabs and not a true full mid-plate. I cut the tabs off the side. Thus there are no holes on the lower area to align with the bellhousing. Obviously I still used the blocker saver plate that comes with the Mcleod bellhousing.

https://www.holley.com/products/driv.../parts/RM-6093


All times are GMT -4. The time now is 04:44 AM.
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.