CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Wheelie Bars are not needed for Safety on Stockers! (https://classracer.com/classforum/showthread.php?t=47939)

boostedf22c 06-23-2013 11:50 AM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Quote:

Originally Posted by Bruce Noland (Post 387716)
You can't have it both ways Carey. Spin as hard as you like but there is no way of spinning this story to meet your current position. Your car and Stockers have very different launch requirements to be competitive and we can argue this point forever. The simple truth is wheelie bars provide safety to racers and staff and simple little notches to the rear valance pose no threat to anyone.


I'm not spinning anything, except tires. :)

I'm not arguing here. However, I have driven several 9 second stockers, that 60' in the 1.2's, without wheelie bars, and the last thing in my mind was how "unsafe" they were.

I agree about the notches, that's ridiculous. If you are going to allow a car to have wheelie bars, then why limit the manner in which they are installed??

boostedf22c 06-23-2013 11:52 AM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Quote:

Originally Posted by Jeff Lee (Post 387717)
Boosted,
when you say "one more flat on the front adjustment", are you referring to a front-end travel limiter? If so, those are illegal on a Stocker.

One flat tighter on the knob on the top of the shock.

Bruce Noland 06-23-2013 12:37 PM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Was the A car one of the new purpose built factory race cars with all the trick stuff? Maybe a pound or two heavy? How do you think that suspension compares to a 70's Challenger? Also it's not how you feel as far as safety is concerned. It's how safe is the vehicle you are racing.

Notch1320 06-23-2013 01:16 PM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Quote:

Originally Posted by Notch1320 (Post 387652)
Bruce,

I do have a question for you concerning the notches. How is the dated deadline from NHRA sent out to the racers to ensure everyone is aware of the rule change/clarification? I didn't see it on any of the divisional pages. Beyond the folks who frequent this forum, and the people who have been talked to directly by NHRA officials, how is this handled?

Anyone else care to answer this question since I appear to be on the ignore list now? Thanks...

Jack Matyas 06-23-2013 01:51 PM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Quote:

Originally Posted by Notch1320 (Post 387729)
Anyone else care to answer this question since I appear to be on the ignore list now? Thanks...

Against my better judgement and because I've received both NHRA letters I'll answer .First , you probably won't see anything on the division websites as the number of racers affected is small .Second , if you are affected by this change you would surely hear about it at the races - it doesn't take effect till almost Indy - that's almost three months- certainly most who would need these notches would go to a national or divisional race and be told of the changes by the tech staff .Third , there are forums such as this one where the changes are made public and discussed .

You may or may not have noticed I posted a copy of my letter a few weeks ago and that really brought things out into the open .

Almost forgot- it is being discussed by the SRAC with NHRA officials .

Notch1320 06-23-2013 01:56 PM

Re: Wheelie Bars are not needed for Safety on Stockers!
 
Thanks for the clarification Jack. I wasn't sure how the process worked on something like this.


All times are GMT -4. The time now is 07:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.