CLASS RACER FORUM
Page 7 of 12 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Aftermarket/Replacement Cylinder Head Rule Change (https://classracer.com/classforum/showthread.php?t=68473)

HR9121 12-23-2017 11:14 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Quote:
Originally Posted by Dan Fahey (Post 552343)
Not about equal...
It is about developing products for S and SS.
Those are capital systems...

You comment is off the mark.
You could say the same thing about Stockers using Roller Lifters making things equal..!

This was going to happen sooner or later.
Stock morphed from using all stock factory parts to custom built everything.
So much that custom blocks have to be made to keep things Equal!

NHRA now allows Solid Lifters...come on!
What is next?

Staying Pure Stock or Crate Motor are looking better everyday.

What do you call it today.. Junior Super Stock with 8000 rpm shifts
Or
Junior Modified Production Super Stock with 12000 rpm shifts
More safety gear and Roll bars and stuff pro level cars have?

Sooner or later NHRA is going to give these classes hair cuts.
Too much, too fast and more Insurance to cover risk!

D
That's a good idea Dan, stay Pure Stock and enjoy racing your car that way.

Bob Bender 12-23-2017 11:26 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Hey Dan, if it was not for Veterans you would have no rights. Go play soccer!!!!!

Alan Roehrich 12-24-2017 06:56 AM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Fahey, you obviously like nothing about NHRA Stock Eliminator. So how about you stop trying to change it, shut your pie hole, and go race somewhere else?

Lee Valentine 12-24-2017 07:37 AM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Here's how I do it,I look at the rules and say that's the eliminator I want to run. I accept what I'm in for and don't try to change everything. If you can't accept the rules go do something else.

PJ305 12-24-2017 11:43 AM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
I have a question for whoever dreamed up the need for replacement heads for SBC engines. How do you think it is easier to find a 624 head for a 1986 350 truck than a 1979 Chevy car with a 350? How did you determine 62-79 SBC are the only engines affected? I also like to know how we are going to shrink an intake runner from 185cc to 172cc legally? MERRY CHRISTMAS & HAPPY NEW YEAR

Ed Wright 12-24-2017 11:58 AM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
D, since IHRA kicked you to the curb, where are going to run Pure Stock?

HR9121 12-24-2017 12:28 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Quote:
Originally Posted by PJ305 (Post 552363)
I have a question for whoever dreamed up the need for replacement heads for SBC engines. How do you think it is easier to find a 624 head for a 1986 350 truck than a 1979 Chevy car with a 350? How did you determine 62-79 SBC are the only engines affected? I also like to know how we are going to shrink an intake runner from 185cc to 172cc legally? MERRY CHRISTMAS & HAPPY NEW YEAR
PJ I think this one even has us Chevy guys scratching our heads, no pun intended!

ken robinson 12-24-2017 12:32 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Ok ....what aftermaket head was given the ok . I didnt see anything in the blue print for the 350/295 1967 yet . Dart or edel . gota be an iron casting ....p.s. go run street et .

PJ305 12-24-2017 01:05 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Quote:
Originally Posted by ken robinson (Post 552369)
Ok ....what aftermaket head was given the ok . I didnt see anything in the blue print for the 350/295 1967 yet . Dart or edel . gota be an iron casting ....p.s. go run street et .
They have it listed in the Stock Car Classification guide at the bottom of the page. Maybe the aftermarket head post will disappear like the cam journal and lifter post did....lol

Paul Sarvas 12-24-2017 02:14 PM
Re: Aftermarket/Replacement Cylinder Head Rule Change
 
Quote:
Originally Posted by Bob Bender (Post 552333)
Your not a Veteran so don't bring the Army into this you communist bastard! !!
Quote:
Originally Posted by Alan Roehrich (Post 552352)
Fahey, you obviously like nothing about NHRA Stock Eliminator. So how about you stop trying to change it, shut your pie hole, and go race somewhere else?
Quote:
Originally Posted by Ed Wright (Post 552366)
D, since IHRA kicked you to the curb, where are going to run Pure Stock?
No holiday cheer @ Class Racer eh fellas? Nice...

pS


All times are GMT -4. The time now is 07:27 AM.
Page 7 of 12 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.