283,327,305,307,blocks and cranks,heads
 

we have 283,327,305,307, blocks and cranks, we have about 80 cranks mostly steel,and about 40 blocks,we have 441,186,462,461,461x and others let us know what you need, quit racing and need to clear out room
806-372-9232 monday - friday 9:30- 4:00

Re: 283,327,305,307,blocks and cranks,heads
 

were are you located?

Re: 283,327,305,307,blocks and cranks,heads
 

Do you have any '57 283 blocks?

Re: 283,327,305,307,blocks and cranks,heads
 

Amarillo , texas

Re: 283,327,305,307,blocks and cranks,heads
 

I will look . what casting number do you need ?

Re: 283,327,305,307,blocks and cranks,heads
 

we have standard bore 265 casting date L-2-7, casting # 548
$400.00 806-372-9232

Re: 283,327,305,307,blocks and cranks,heads
 

That should be a 283 block.
"L" means December and the "7" means 1957
so that should be a 1958 283 block.

Re: 283,327,305,307,blocks and cranks,heads
 

What are you asking for the 441's and 461x's? Thank You.

Re: 283,327,305,307,blocks and cranks,heads
 

Unless it was a service block. That casting number was used on 265s and 283s in '57. 265s were serviced until 1964.

Re: 283,327,305,307,blocks and cranks,heads
 

Hey guys.
This is Carroll Caudle's collection of years and years in the business.
I have been told that he has a very large supply of cores.
I'm sure an experienced Modified /Gas-Ect.-Ect. racer like him knows the difference between a 265 and 283.
You might give him a call. He has way more than what is listed here. I think he is selling some shop equipment, too.

Re: 283,327,305,307,blocks and cranks,heads
 

it is standard 265 bore , it was a pick up engine and they used the same block for 265's just bored to 265 not 283, we have sonic tested it and it will bore to 283 just fine !

Re: 283,327,305,307,blocks and cranks,heads
 

dont have any 461x's left, but still have some 441's $250.00 per set,

Re: 283,327,305,307,blocks and cranks,heads
 

I am looking for a block & 997 heads so I can run a 245hp 2X4 in my '57 handyman wagon in stock.

Re: 283,327,305,307,blocks and cranks,heads
 

I dont have any 997's left, but the block would work great for you ! I do have a set of 520 T heads , can you use them ?

Re: 283,327,305,307,blocks and cranks,heads
 

What combination where the 520 T heads used on?

Re: 283,327,305,307,blocks and cranks,heads
 

nhra list them for all combos that year , good heads

Re: 283,327,305,307,blocks and cranks,heads
 

I'm looking for a good set of 186's or 462's that haven't had a valve job done on them or anything else. Will be used on stock eliminator motor.

Re: 283,327,305,307,blocks and cranks,heads
 

Hey Greg,
Give me a call. Calton or Buddy have my number.

Re: 283,327,305,307,blocks and cranks,heads
 

the only 462, 186's i have lefthave had very mild port work done ,
sorry !