Fuel Injectors
Guys and Gals,
I am about to purchase a set of injectors for my LT1 stocker motor. I think I know what lb. to get but I had a question if one brand is prefered over the other (ie. Bosch, Accel, Holley, etc..). Is there anything I should consider prior to purchase. Thanks for any help. Chris |
Re: Fuel Injectors
Check your PM.
|
Re: Fuel Injectors
Bosch. ACCEL injectors are made by Bosch now. Avoid cheap crap like Venom, etc. 30 lb is plenty big enough. I would use 24 lb at 60 psi if it were me.
|
Re: Fuel Injectors
I bought Accel 24 lb injectors when I put my LT-1 together. I ran it at 55 lbs. fuel pressure.
The present owner has bigger injectors in it. I really don't think they are needed.....30lb'er's sound about right from the info I was able to gather from my data logger.... I had no probelm with the Accel's and had an Accel Gen VII ecu and data logger....and they are still in the car now.... |
Re: Fuel Injectors
I appreciate the help gentlemen. Hopefully see you in Baytown in March
|
Re: Fuel Injectors
As dumb as it sounds, the ford motorsports ones are good, and if you thumb through a mustang magazine, you can usually find them pretty cheap.
|
Re: Fuel Injectors
It isn't dumb. They are the ones we prefer and run.
|
Re: Fuel Injectors
Quote:
regards, Roland |
Re: Fuel Injectors
The Ford Motorsports injectors are Bosch. Just another place to buy them.
|
Re: Fuel Injectors
Quote:
|
Re: Fuel Injectors
Quote:
regards, Roland |
Re: Fuel Injectors
Quote:
The tech guy at Ford Racing stated that they sell whatever they get from the Ford supply chain. In other words what is currently being installed on the assembly line is what they get. They use Bosch, Siemans and Ford built injectors. If they are Bosch they will have the name on them but if Siemans or Ford they only have part identifer numbers on them. regards, Roland |
Re: Fuel Injectors
They may have, but I haven't heard that they are no longer being made. You can still get plenty of them from several sources online.
http://www.ebay.com/itm/Mustang-Ford...#ht_2202wt_770 |
Re: Fuel Injectors
Quote:
regards, Roland |
Re: Fuel Injectors
I've started using FAST injectors this past year. Easy to find and many flow rates. Have 36lb FAST in it right now, running at 60 psi.
|
Re: Fuel Injectors
Quote:
|
All times are GMT -4. The time now is 06:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.