Front end alignment 67 vette
 

I almost have the car ready for its first test run. I need to have the front end aligned and look for alignment specs 67 vette. Thanks Brett

Re: Front end alignment 67 vette
 

vetteboy do you need street specs or race alignment specs?
I put a post up on one of the Vette forums Iam on and Iam sure
someone there will have some insight.

Jimmy

Re: Front end alignment 67 vette
 

If this is a class race car with OE style suspension, for drag racing only, then, with the front end raised about 1-1/2" from static ride height, you need 1/16" to 1/8" toe in, 0 degrees camber, and as much positive caster as you can get.

Re: Front end alignment 67 vette
 

I would contact Billy Nees. He did a great job on all our Corvettes.

Jeff Jewell

Re: Front end alignment 67 vette
 

It has OE suspension and will be a drag car only. Thanks for the information. Brett

Re: Front end alignment 67 vette
 

vetteboy, check this web site,
www.guldstrand.com/alignment.asp

Re: Front end alignment 67 vette
 

There ya go ^^^!

Re: Front end alignment 67 vette
 

If you are using OEM type bushings, the settings will not stay put. Also, without some serious work, you will need to limit the front suspension travel to keep the toe and camber within reason.

Re: Front end alignment 67 vette
 

I would love to see some pictures of your 67. Could you post some or email some to L79racer@aol.com. Some specs would be nice also. Thanks,

Vinny

Re: Front end alignment 67 vette
 

If you want it done right contact Richard Doane in Dayton. Shop number is 937-279-1187.

Re: Front end alignment 67 vette
 

Thanks for all the information. I’m taking the car to the track tonight for its first ever run. Right now the car is set up with the 427/390hp 4speed. My plan is to run the 427/400hp but I don’t have the carbs done yet. I will try to post some picture and my result from tonight. Thanks

Re: Front end alignment 67 vette
 

I run a 71 vette 454/425 combo... The bump steer on vettes can be very touchy and my advice is to make sure you talk to someone who is familiar with them. Our Car and both of the Art's cars (Brandon Wilkinson, and Kenny Schiendler) were done by Gary Jennings. In my opinion he is the best.


Gary Jennings
Nashville TN

(615) 754-9381