Carb. Hesitation
I'm running a 340 with a carter AVS. I was wondering if anyone has ever had trouble with a hesitation on the starting line during acceleration?
|
Re: Carb. Hesitation
Check accelerator pump and jetting.
|
Re: Carb. Hesitation
I changed the accelerator pump and it helped it. But it still has a slight hesitation?
|
Re: Carb. Hesitation
Have you tried drilling the squirter holes to something like .035"?
|
Re: Carb. Hesitation
Haven't done that yet. Might give it a try
|
Re: Carb. Hesitation
Look at the air door tension.
|
Re: Carb. Hesitation
Tighten the air valve spring, it needs to be pretty tight on them. Put the accelerator pump rod in the hole that gives the most travel of the pump, I think it's the outer hole.
|
Re: Carb. Hesitation
I have the air valve a little loose now. I will give it some more tension. I've got the pump rod in the outer hole it seems to work the best there
|
Re: Carb. Hesitation
Has anyone tried sanding down the metering rods? Making them skinnier.
|
Re: Carb. Hesitation
Easier to change jets or rods than sanding on them and probably a bit
more accurate. Work with your accel. pump by bending it so you have as much squirt left as possible when engine is stalled up on line. |
Re: Carb. Hesitation
pm sent
|
| All times are GMT -4. The time now is 12:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.