question for EFI guys
 

what fuel hose do you like?
not exactly a stocker question, just a project I got suckered into


btw, any of you guys w/supercharged Camaros willing to answer a couple of questions for me?
I've got an crate LSA I may need some advice on...


thanks!

Re: question for EFI guys
 

nobody?


wow....

Re: question for EFI guys
 

Running Russell Twist-Loc on everything nowadays without any issues.

Re: question for EFI guys
 

Jegs Proflow hose. Lightweight. The fittings will be a small fortune, regardless of name vs no name.

Re: question for EFI guys
 

what kind of car is it? Ford? chevy? is this on a budget or is money not an issue?

Re: question for EFI guys
 

94 chevy 1/2t with a LSA crate motor...needs to run 65 lbs fuel pressure

Re: question for EFI guys
 

yeah, no kidding. at least it's not my bank acct it's draining;)

proflow good at 65 lbs?

Re: question for EFI guys
 

You can buy used NASCAR hoses on ebay and save some money.

Re: question for EFI guys
 

Tom,
Its rated to 1500 PSI. It will be fine to 65 PSI. I was not very specific, its the 350 series hose.

Re: question for EFI guys
 

is it gas safe?


btw, used ain't an option....

Re: question for EFI guys
 

Save yourself money and aggravation...

http://www.russellperformance.com/mc...wist-lok.shtml

http://www.russellperformance.com/mc...wist-lok.shtml

Re: question for EFI guys
 

thanks guys, think I've got it under control now...can't bring myself to use twistlock on a high pressure system though...

Re: question for EFI guys
 

Can't make a twistlock leak Tom. I have however seen braided line connectors leak due to improper assembly. You will be fine either way.

Re: question for EFI guys
 

more worried about if it would go to deadhead pressure for some reason and having it blow off...I've been on fire before;)

Re: question for EFI guys
 

Just from experience I think it would be more likely the hose would rupture before it came off the fitting in any scenario...impossible to pull one off, must be cut. ;)

Re: question for EFI guys
 

Rich, do you think that hose is legal to use from pump in trunk to engine compartment ? I thought metal or steel braided was required.........

Re: question for EFI guys
 

Pretty sure it is NHRA approved. Mine is protected/shielded in the flywheel area.

Confirmed - pg 97 http://promod.nhra.com/userfiles/fil...edProducts.pdf

Re: question for EFI guys
 

Thanks. Prices are all over the place for braided line. I'll check out the russel stuff.