Metric 200 Locking Dipstick
 

What are you guys using for a dipstick? And where can I get one?

Re: Metric 200 Locking Dipstick
 

CT power train products $31.99 plus shipping

Re: Metric 200 Locking Dipstick
 

I use this Lokar: http://www.jegs.com/i/Lokar/625/1211344/10002/-1

Disconnecting the flexible dipstick tube from the trans and popping in the sealing plug makes changing transmissions a lot easier. The firewall mount eliminates one more juggling act compared to a trans bolt mounted unit, especially when you have limited firewall space. -Al

Re: Metric 200 Locking Dipstick
 

Lokar. For the top mount I made a bracket with two holes and bolts thru the holes and the heads welded to it, mounted it to the firewall from the inside and pop riveted it from the out side with one rivet. Now you have two studs sticking out and you can fasten the top. Makes it easy to loosen the top when dropping the trans and then you have easier access to remove the tube and put in the plug, and same when installing the trans.

Re: Metric 200 Locking Dipstick
 

Tried that one first and it wouldn't work on my 4th gen F body. I had success with the Lokar product though.

Re: Metric 200 Locking Dipstick
 

We have used that in application s where either access or space was not a problem

Re: Metric 200 Locking Dipstick
 

Get a dipstick out of a late model car. Measure and cut length

Re: Metric 200 Locking Dipstick
 

Lokar?? $134 for a dipstick?? No wonder it's expensive to race!
As someone else said go to a junkyard and get a stick from a late model RWD GM vehicle. Use your original dipstick and ck fluid level. Cut new dipstick if necessary to length and mark accordingly to match reading. Spend the $128 you saved on enrty fees.

Re: Metric 200 Locking Dipstick
 

The TH350 is not the same length ?

Re: Metric 200 Locking Dipstick
 

Get a lock-in GM stick and cut it to whatever length you need or cut the 200 stick off and weld it to a GM locking handle

Re: Metric 200 Locking Dipstick
 

I used a GM locking dip stick.cut it off 3" from the top and keep a stock one in the trailer.

Re: Metric 200 Locking Dipstick
 

That's why that Dodge is fast, GM parts in it LOL