Steering coupler
 

I want to remove the stock rag joint found in most mopars with a steering coupler. I asked Borgeson and they gave me the completely wrong part number. Does anyone know the proper coupler for a 67 cuda with manual steering.

{found it}

Re: Steering coupler
 

How about sharing that info?

Re: Steering coupler
 

Re: Steering coupler
 

Thanks

Re: Steering coupler
 

Rag joint on a Mopar ???

Re: Steering coupler
 

Me too??

Re: Steering coupler
 

do not buy one until I get mine in to the car. I do not want you to buy something wrong on my account.

Re: Steering coupler
 

Only coupler I know of allows you to use a power steering column with a manual steering box . The flex joint in the column is like a crude u-joint .

Re: Steering coupler
 

I sell the adapter to go from power to manual steering. Makes up the difference of the two shafts. Call me at the shop 951 7878783

Re: Steering coupler
 

this is manual to manual, do you have this

Steering Universal Joint Style: Standard
Shaft End 1: 3/4 in. 36-spline
Shaft End 2: 3/4 in. without splines

http://i.imgur.com/UYM66v2.jpg

Re: Steering coupler
 

also check with Flaming River Products

Re: Steering coupler
 

I did look at FR and their adapter was almost 4 times the expense of the other u-joint.

Re: Steering coupler
 

i got the u-joint on the steering shaft and the box. It will need to be welded onto the shaft. To get it to fit properly i had to mildly grind the shaft down a few hundreths

[IMG]https://i.imgur.com/fJapuKe.jpg[/IMG]

Re: Steering coupler
 

Looks to me you got it sorted out. Remember to center/index the steering wheel before welding.

Re: Steering coupler
 

Already done