CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Clutch Pack Clearance (https://classracer.com/classforum/showthread.php?t=11781)

Mike Pearson 07-11-2008 01:26 PM
Clutch Pack Clearance
 
What should the clearance in the reverse clutch pack be for a powerglide with a trans brake, Super Stock, Small Block. As I remember about .065. Refresh my memory. Thanks.

Terry Cain 07-11-2008 03:27 PM
Re: Clutch Pack Clearance
 
Mike,
Sounds about right. I was setting mine at .070 without brake.

Mike Pearson 07-11-2008 05:32 PM
Re: Clutch Pack Clearance
 
Thanks Terry, I just wasnt sure. its been a few years since I set one up. And I am not getting any younger LOL

jmarkaudio 07-13-2008 12:06 AM
Re: Clutch Pack Clearance
 
Reverse can be run up to .120, I run .090 to .100. You can get a selective steel set from TSR Racing if needed. If you can get a little more clearance you will have a little less friction going down the track.


All times are GMT -4. The time now is 10:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.