CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   stamped steel SBC rocker arms (https://classracer.com/classforum/showthread.php?t=13707)

Dragsinger 10-24-2008 09:51 PM
stamped steel SBC rocker arms
 
in the past, I have used the Crane heat treated rockers for SBC stocker engines. Is this still a good option? Is there a better rocker choice?

SSDiv6 10-24-2008 10:14 PM
Re: stamped steel SBC rocker arms
 
Quote:
Originally Posted by Dragsinger (Post 88762)
in the past, I have used the Crane heat treated rockers for SBC stocker engines. Is this still a good option? Is there a better rocker choice?
Both Crane or Elgin are a good choice.

http://www.competitionproducts.com/p...s.asp?dept=474

John Musial 10-25-2008 08:22 AM
Re: stamped steel SBC rocker arms
 
Quote:
Originally Posted by SSDiv6 (Post 88766)
Both Crane or Elgin are a good choice.

http://www.competitionproducts.com/p...s.asp?dept=474
Larry, then send them to Jim Bailey www. finishedracing.com to get them Cryo-ed and Rem finished.

Joe Sprint Bros 10-28-2008 08:41 AM
Re: stamped steel SBC rocker arms
 
Larry, IF you are racing IHRA, I would spend the money on roller rockers, they are legal in IHRA stock.If NHRA, then go the previously suggested route. Joe.

Joe Sprint Bros 10-28-2008 10:53 AM
Re: stamped steel SBC rocker arms
 
...and 7/16 studs.

rutledge 11-14-2008 11:53 AM
Re: stamped steel SBC rocker arms
 
Are any of these rockers available in 7/16 for a sbc?

FED 387 11-14-2008 04:58 PM
Re: stamped steel SBC rocker arms
 
Elgin part#-- ELGRK-1508 ----is a 7/16 stud 1.5 ratio SBC rocker arm---Comp 387


All times are GMT -4. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.