82-92 F-body stock rear sway bar
 

What size rear sway bar is recommended for a third-gen Camaro stocker? I've noticed that GM offered a couple of different sizes.

DTS 12-bolt, S&W suspension, Eibach drag launch springs and bag.

Thanks for any Info!
Bob

Re: 82-92 F-body stock rear sway bar
 

I don't know of many guys running a rear sway bar. Look into getting a nice anti rollbar.

Re: 82-92 F-body stock rear sway bar
 

If you have no restrictions on what you can run go with the Spohn 1" drag bar. If you can only run stock parts then looking into the 87-92 GTA Trans Am rear sway bar or the 88-92 1LE Z28/Trans Am sway bar. They are the 2 largest GM offered on the cars from the factory. The GTA bar is much easier to find compaired to the 1LE.

Re: 82-92 F-body stock rear sway bar
 

OWNSS...Thanks for the reply...I plan on installing S&W's anti-roll bar in the future but for now I'm going to use a factory sway bar...

I've looked under quite a few of these cars at divisional events and noticed that some racers still use a factory type sway bar.

I'll start searching for one of the bars you mentioned.

Thanks ! Bob