66-67 chevyII
 

Does anyone make a good double adjustable shock for the front of a 66 chevy II that will fit the stock mounts? I just purchased a pair of Afco's that don't fit. What are the super stock guys using for these cars, and do you have to run the factory spring, or can you convert it to a coil over set up with the stock upper a-arm? Any help would be appreciated!

Re: 66-67 chevyII
 

You cannot do a coilover converstion, but don't pitch your AFCOs yet.
Call this guy. He makes a mount for the bottom of the shock.
http://www.matukasmotorsports.com/index.html

Re: 66-67 chevyII
 

Thanks James, I'll give him a call. The problem with the afco is the bottom adjuster on the shock makes the overall diameter of the shock to large to fit inside of the factory spring. What shocks do you run on the front of your car? Thanks

Re: 66-67 chevyII
 

send me an email address and I can tell you what Afco number it is for the part that will make it bolt on without a problem...
http://proheadersystems.com/gallery/...ns+duece&id=53

info@proheadersystems.com

Re: 66-67 chevyII
 

I found the part # and its a part you can get from Afco. Email me and I will send it over. Also I will explain how we got the car to sit this nice and also work as well....

info@proheadersystems.com
402.438.0430
Chassis1

Re: 66-67 chevyII
 

What brand of front coil springs are you using?

Re: 66-67 chevyII
 

moroso trick springs