More Front Suspension help
 

I had posted last year about some suspension help and got alot of good feedback on the questions i asked.

This season I am finally completing the suspension. I am cutting some coils to lower the front end to gain two more inches of travel as i only have three inches now. I will be pulling the control arms off to be powder coated, and i will be ordering new Del-A-Lum bushings this week. the main question i have is what ball joint should i get? I heard things about the QA-1 ball joints on my last post but am also looking for first hand experience and what you guys are running.

What else do you suggest i do to the front end? Del-A-Lum bushings, QA-1 shocks, moroso springs, is what the car currently has.

thanks alot guys i appreciate it!!!

-Scotty Hakucsa-

Re: More Front Suspension help
 

Type of car?

Re: More Front Suspension help
 

sorry about that! lol that info might help just a little bit haha...

Car is a 68 camaro, BBC, all steel with glass hood, running 10.20's sixty footing around mid 1.40's

Car is foot braked with minor trans brake S/ST racing and will one day be a stocker (i can dream)

Thanks for any replys guys!!!

Re: More Front Suspension help
 

Howe precision ball joints. You can get them with up to a .5" longer stud to increase your front end travel. Best place I have found to get them is www.SCandC.com. They can build them for you with whatever length stud you want.

Re: More Front Suspension help
 

1 have a 72 ventura which has the same suspension/subframe.moroso springs and bushings,22 year old 90/10 shocks and new but stock ball joints and shafts.it runs similar et's to yours and 60ft's are 1.37 to 1.40 anywhere!good luck scott

Re: More Front Suspension help
 

aa