Stock Eliminator K-member question
 

I believe I know the answer but can't find it in the rule book so thought I would ask. Can I run an aftermarket K-member in IHRA? I'm building a '94 Camaro to run S/GTB ('71 350/330 LT1 with a Jerico). Also, if I have to run the stock K-member I would like to remove the OEM steering components to run a lighter, aftermarket manual unit. Who makes something to bolt up to the factor K-member? Thanks!

Re: Stock Eliminator K-member question
 

No to the aftermarket cross member....Flaming River (dont know the phone #) has steering components for your needs.

Re: Stock Eliminator K-member question
 

Thanks. I figured as much on the cross member. I called Flaming River today to get a part # and price and they said they do not make anything in a box or rack for my application. ??? Anyone know any differently or another company? I appreciate the help.

Re: Stock Eliminator K-member question
 

I use one from Brian Jeffery's Madman Racing in Baton Rouge, LA. Here is a link to his website:
http://www.madmanandcoracing.com/

Brian's ph # is 225-673-3533

Re: Stock Eliminator K-member question
 

Try Smith Performance Specialties for your rack and tie rod ends

Re: Stock Eliminator K-member question
 

Thanks guys. I found the complete kit at the site you suggested Ed. Hey ... I didn't know you were running Super Stock. You used to do the PCMs for my bolt-on Impala SS that I ran in Pure Stock too. I got tired of all those underhood wires so I'll go back to a carb on this one ... :) Always enjoyed working with you and loved your customer service!

Re: Stock Eliminator K-member question
 

Great! Thanks! Brian (Madman) does a lot of late F body cars. Good guy to deal with also.

Ed

Re: Stock Eliminator K-member question
 

X2. Freds a great guy and will be more than willing to help you out. Heres a link to his online cataloge.

http://www.smithperformance.com/catalogue_fbstock.html