Vega wheels
 

I need some 14 inch steel wheels to fit a stock Vega 4 lug bolt pattern.
What wheels should I look for ????? I think it's 4 lug on a 4 inch circle.....
This is just a temporary fix so I can roll it around as I've got a good set of 14 inch tires just setting......THANKS......jlk

Re: Vega wheels
 

I pretty sure wheels off of a early Nova 62-63 ,and corvair might work.A early mustang might work also.

Re: Vega wheels
 

Wheels from monza or from olds starfire will work.

Re: Vega wheels
 

He's asking for 14" wheels. All the examples mentioned are 13".

Re: Vega wheels
 

Dwight is right sorry.

Re: Vega wheels
 

look at some of the older RWD corrollas.
the center hole is too small but if it's just for rollers....hog it out!
OR look for some aftermarket wheels in a 14", the center holes are already too big;)

TRY ONE FIRST , i'm NOT sure that vega and early nova are the same bolt circle...

Re: Vega wheels
 

I'm at wit's end looking for wheeels !! So I';m just going to look for some usable used 13" tires
I live in Tightwad, TEXAS and I'm CHEAP.......:-)