torque converter suggestions
 

Racers,

let me hear about converter builders who consistently deliver the expected results. A builder who will take the time to listen, suggest, and build a quality product.

Thanks for your feedback

Re: torque converter suggestions
 

Just call ATI.

Re: torque converter suggestions
 

Ultimate converters, Lenny is at the races and will work with you until you are happy. Contact information is on the header in class racer.

Re: torque converter suggestions
 

I love my clutch don't have to mess with converters,
My advice is find somebody you're comfortable with and can work with cause if buy one here don't suit you
buy another one there could end up with two of same thing where if you deal with one they can {well should} be able to make correct adjustments if needed. Can't remember who @ A-1 I talked to 6-7 years
ago but they would listen and knew what they were talking about,call around and talk to some of them
beware of the guy who can answer every question quickly,not always a bad thing though,get your
question answered then think about the answers you get and some of them sound good at the moment
but after thinking about them you say wait a minute that doesn't make any sense.If stocker ,ss figure
on buying 2-3 at least especially if low power combo get the right one guard with your life.Had bracket
customer sent his converter for freshen up he's run this combo 8-10 years was slowed down .25 in
1/8 stahl was changed come to find out they made it spagless for some reason ,was suposed to
just like was but freshened.he was upset.
Mike Taylor 3601

Re: torque converter suggestions
 

Paul Forte at Turbo Action, he's a fellow racer and gives great service.

Re: torque converter suggestions
 

Larry, You have mail....





I don't know what happened to it either , Larry I sent it direct this time

Re: torque converter suggestions
 

lenny at ultimate is one of the most hands on guys you will find. give him a call.

Re: torque converter suggestions
 

I've known Lenny for at least 35 years and he is a stand -up guy,..,.and I'm allowed to say that too, because HE is a sponsor here (LOL)

Re: torque converter suggestions
 

EXACTLY, none better!

1.20 60 foot so far with the new ride off the footbrake @ 3124 lbs. in the heat

http://i381.photobucket.com/albums/o...wn7-12-092.jpg

and 1.28 best off the footbrake @ 3880 lbs. with my former ride

http://i381.photobucket.com/albums/o...25-08ETown.jpg

Re: torque converter suggestions
 

Send a PM to Mark Yacavone. I understand he's one of those "best kept secrets" in building S/SS converters. :)