3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
Racers,
Under construction is my 1990 Firebird, manual shift, tunnel ram, small block combination. Ideas/options are needed for the hood & scoop. The plan is for a forward facing scoop, as low as possible yet give sufficient room over the carbs. One valid consideration is to have the scoop mounted on the carbs, then slide a flat hood around the scoop. [like a Comp or Pro Stock set up] It will be a big help if some pics can be posted. Let me know what you have. Please send a PM for my email if you want to email pics. Thanks |
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
If this is to be a SS car, hoodscoop must be part of hood, I believe this is also the case in most comp classes. Go to autoimagery and put in super stock you can see alot of different scoop combos there. Joe
|
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
no class rules, this is an association of stick racers built along the lines of Modified or Comp class cars. I am fully aware of the the web site photos but that is not enough detail.
My hope is to find a few specific examples with detail photos |
Re: 3rd Generation [1982 - 1992] Camaro/Firebird hood scoop
got it handled, will post photos later of the completed project
|
All times are GMT -4. The time now is 06:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.