Coan 7" Maximum Performance Steel Stator Convertor (Extreme High Stall)
 

Brand new, never ran.

Coan part number COA-10600A - http://www.coanracing.com/Catalog.as...uctDetail=1072

Coan has it listed on their site for $1750, I will sell for $1000 shipped, or best offer.

Pics

http://www.coanracing.com/Imgs/COA-1...A-10600A_1.jpg

http://www.coanracing.com/Imgs/COA-1...A-10600A_2.jpg

http://www.coanracing.com/Imgs/COA-1...A-10600A_3.jpg

http://www.coanracing.com/Imgs/COA-1...A-10600A_3.jpg

http://www.coanracing.com/Imgs/COA-1...A-10600A_5.jpg


TX3015D - is what's on the convertor

The T means it is a turbo spline.
The X means it is a steel stator
The 30 means it is a 30 degree fin angle on the stator. Loose, high stall.
15 is the Stator blade count. The more blades the higher the stall and more torque multiplication.
I think that no number between the 15 and the D means if it a full fin Stator that should be a hard hit leaving.
The D is the pump fin angle. A being full positive and E being full negative.