Browell Bellhousing Alignment Tool
 

Anybody who has dialed in a bellhousing knows it is a real pain. I am putting a new motor in the car this winter and a friend of mine tells me to borrow his Browell bellhousing alignment tool to get the bellhousing indexed properly. Holy crap in 15 minutes I had the bellhousing all indexed. This tool hits it out of the park in my opinion.

You bolt the locating fixture on the crank, bolt up the bellhousing, then slide the black collar to try to slide it into the bellhousing center hole. If it slides in then you are good, if not use some offset dowels to be able to slide the collar in the center hole.

http://i149.photobucket.com/albums/s...n/DSC03632.jpg

http://i149.photobucket.com/albums/s...n/DSC03629.jpg

http://i149.photobucket.com/albums/s...n/DSC03628.jpg

Re: Browell Bellhousing Alignment Tool
 

I have it and it's awesome.

Re: Browell Bellhousing Alignment Tool
 

How much?

Re: Browell Bellhousing Alignment Tool
 

I think it is around $150 which seems like quite a bit but you don't know how worth it that is until you use it.

Re: Browell Bellhousing Alignment Tool
 

WHERE do you get one?

Re: Browell Bellhousing Alignment Tool
 

Here: http://www.browellbellhousing.com/