Clutch fork.
 

I am updating my clutch setup and was wondering if there is a clutch fork out there that is head and shoulders above the rest.I've been using the Lakewood 15500 piece(Small block in '79 Camaro).
Is there any one using anything that would be an improvement;or is an improvement really necessary?

Re: Clutch fork.
 

I've always used the factory GM piece. The Lakewood is good but it is thicker-which sometimes runs into clearance problems.

_____________________________
Andy Stone 1102 A/S 1112 SS/C

Re: Clutch fork.
 

I use the clutch fork for the 64-81 corvette. It is quite a hefty piece & uses a pin instead of the ball.

Re: Clutch fork.
 

I use the 64-81 corvette fork and it's still available new from any G.M dealer

Re: Clutch fork.
 

X3 on the Corvette clutch fork........ With a pin retaining the rod to the fork, leaves no chance for the Rod to accidently drop out!

Re: Clutch fork.
 

Would you happen to know the GM part # for that 64-81 Corvette fork?

Re: Clutch fork.
 

Try G.M part # 3887177 it's the one in my car...Luke SS 311

Re: Clutch fork.
 

Thankyou Luke, for the number,
Terry.