Anybody have info regarding SM Lifters.......
 

Are any of you guys running his stuff? Or are you still using your Schubecks? I have run Cliff Shermans' stuff so far and have been very happy.......

Wade O

Re: Anybody have info regarding SM Lifters.......
 

I have both Schubeck and SM and I haven't had any problems with the SM lifters. They are good to deal with too. Comparing the two makes side by side, I'll take the SM's anyday. They are of much better quality.

Ryan

Re: Anybody have info regarding SM Lifters.......
 

By SM are you talking about Smith Machine in Ceder City Utah? If so here is my .02. One of new lifters has had bottom come off and destroyed engine 1st pass. Three more out of the the same set refuse to pump up and the plunger just lays on bottom spraying oil out top everywhere! I run plenty of spring pressure, work on rocker geometry carefully, don't adjust them too loose.... I have been building engines 50 years. Quality control on cups is better than Schubeck, I don,t have to hand fit pushrods to each cup anymore. Fortunately with problems with Schubeck, he would fix or replace them......Smith is always willing to sell me a new set for retail... of course. I need to find about new tool steel lifters :confused:

Re: Anybody have info regarding SM Lifters.......
 

474 people read and only 2 have any experiences? C'mon guys! I'm not asking for a lynching, just curious.........

Wade

Re: Anybody have info regarding SM Lifters.......
 

Wade,

Stick with the Sherman lifters and don't ask for troubles at this time .. Wait and let them figure out their problems , don't be a test case... You can't go wrong with the Sherman's...............

Re: Anybody have info regarding SM Lifters.......
 

does anyone have contact info on sherman lifters? Thank

Re: Anybody have info regarding SM Lifters.......
 

225-323-0052 is what I have

Great guy and very helpful....

Wade