throwout bearing problem
 

Have a question about what throwout bearing to use, Vehicle has a chevy clutch fork, 18 spline input shaft Jerico 4-speed with a McLeod long style pressure plate.(soft lock). Local part store cant come up with a replacement. Does anyone have a part number or know whats best to use?
Thanks in advance-Ed.

Ed Fabian
NHRA S/S 3045
64 Ford Mustang SS/L

Re: throwout bearing problem
 

I use a HAYS 70104. McLeod, Hays, Ram all have some good ones. I don't knw how this crosses to a Factory replacement #.

Re: throwout bearing problem
 

I use the adjustable one from McLeod. I'll look for the number tommorow when i get out to the shop. Ed

Re: throwout bearing problem
 

I can't remember exactly without looking at them but I think it's around 65 chevy truck w/GMC V-6 maybe 1ton or maybe 50 series truck they had long style press plate you could probaly get at the parts house in town that has old stock and parts guys that know parts. You know the guys that can get you a quart of oil without knowing if it's 2 or 4 door
has AC or not What color it is.
Hays,Ram,Mc Leod etc. can fix you up.
Mike Taylor 3601

Re: throwout bearing problem
 

All the McLeod PP's I've seen in a Chevy application uses the McLeod adjustable t/o bearing # 16505 with no spacers.

If you use another brand, don't forget to use a t/o bearing that measures 3 inches across the face for the long style PP.


__________________________

Andy Stone 1102 A/S 1112 SS/C

Re: throwout bearing problem
 

Andy that's the one I use.

Re: throwout bearing problem
 

Ed, I use a Federal Mogul 614018 that I got from a NAPA store. Hope this helps!