Jerico Trans mount
 

I am working out the installation of a Jerico that would be simplified to use a mounting location on the tailhousing that is drilled for a mount that is drilled with 2 3/4" c-to-c holes. I have looked at many trans mounts at my local Advance Auto, but have found none that have this measurement that are usable. I'm sure that Jerico included that postion and dimension to match some factory part and spec, but I have been unable to find the application. Anybody have an idea what it would be?

Re: Jerico Trans mount
 

This is the one I use on my Jerico
http://www.summitracing.com/parts/EN...n/?prefilter=1

Re: Jerico Trans mount
 

Dwight, I also use the Energy Suspension mount. I have hundreds of passes without a failure.

Re: Jerico Trans mount
 

Dwight,

Stock turbo four hundred mount works great. Plenty of support last for years.

Sam

Re: Jerico Trans mount
 

From the replies, I don't think I explained myself well, so here is a picture. I need to know what mount will fit in the location in the photo. The c-to-c on the bolt holes is 2 3/4". I have a TH400 mount, but it fits the wider pattern.

http://i39.photobucket.com/albums/e2...ricomount1.jpg

Re: Jerico Trans mount
 

350 turbo maybe?
don't have one handy or i'd measure it for ya.
seems to me there's a 400 mount with those dimensions but i don't remember what the ap was...