Parts Needed
 

We are in need of parts to build a 350 for the 79 Z-28 stocker. We need roch carb # 203 manifold # 376 and or 346249 head # 462624 and or 376450. Also need spare blocks if anyone has them. Looking for a used set of caltracs, center console and used tach w/ shift light. Any ignition parts and will consider a built 350 stocker motor if the price is right.

Re: Parts Needed
 

Floyd,Just to let you know you do not have to have the correct year carb.,as long as it is a 750cfm Quadrajet you are ok,I would go with a 207 or Newer Edlebrock myself,Some are going to the newer 750 front inlet carbs.you really don't have to have the console to be legal either lots of stockers have removed the console's,Just thought I would suggest some things that might help you in your build.

Re: Parts Needed
 

Thanks Monte. Do yuo know the Eldebrock number?

Re: Parts Needed
 

Floyd check this link. Very large 2nd gen Camaro website. Should be able to find your general stuff, body, interior, cores , etc. here, "NOT" the stock elim. specfic stuff, foreign concept to most there.
CalTracs go fast, when they show up.

http://www.nastyz28.com/forum/index.php

Re: Parts Needed
 

Floyd,
You'll want to use the 624 head and the 249 intake. I run this combo. If you have any questions shoot me an e-mail or a PM.
Joe

Re: Parts Needed
 

Joe Check your PM's

Re: Parts Needed
 

Floyd
I have a Autometer Pro Comp 9000 RPM Tach with two stage shift light and memory. PM me if you are interested.

Re: Parts Needed
 

Floyd,
Check your PM's.
Joe