CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Size of wire?? (https://classracer.com/classforum/showthread.php?t=25605)

bdixon 05-06-2010 09:01 PM

Size of wire??
 
When wiring like say a electic fuel pump is it an advantage to usr bigger dia wire or can bigger pull more juice???? thanks in advance for any help bryan

FED 387 05-06-2010 09:14 PM

Re: Size of wire??
 
If your wire size is to small and the distance from the powersource(usually the battery) to the pump is fairly long you will have a drop in amperage. The pump manufacturer will usually give you a recommendations as to what size wire to use but in no case should you use a wire size that is smaller than the wires on the pump for optimum pump output as well as preventing the pump from overheating.
It's all about Amps not voltage your gonna get 12 volts but the Amps will drop due to small wire size and distance !!

cad 05-06-2010 09:27 PM

Re: Size of wire??
 
Install a relay inline with the pump and you will not have to use large wire.
http://www.painlessperformance.com/Manuals/50102.pdf

Moparteacher 05-06-2010 09:33 PM

Re: Size of wire??
 
The longer the wire the greater the resistance. Double the length of the wire and you double the resistance of the wire.

The larger in diameter the wire the less resistance in the wire. You can't go too big.

The resistance of the wire adds to the resistance of the circuit overall. As resistance goes up, current goes down.

12-14 gauge wire should be more than sufficient for a fuel pump in any race car. The smaller the gauge the larger the wire.

FED 387 05-06-2010 09:53 PM

Re: Size of wire??
 
Thanx Gary--thats what I was trying to say!!! I know what it is just not how to put it down on paper--Comp 387

GTX JOHN 05-06-2010 11:37 PM

Re: Size of wire??
 
We run a dedicated fused hot wire from battery t o a relay (10-12 gage) and then to pump. Relay is switched thru ignition switch and then separate . switch on dash (14-16 gage). Fuel pressure seems steadier even with Holley or Mallory 140 with this direct set up.

72Malibu 05-07-2010 05:43 AM

Re: Size of wire??
 
Electricity is like water, ya just need a bigger hose ;)

BlueOval Ralph 05-07-2010 06:23 AM

Re: Size of wire??
 
When using a relay you should be carefull how you mount the relay and in what direction, so that on accell the G-forces does not shut the relay off! Just a FYI


Quote:

Originally Posted by bdixon (Post 186154)
When wiring like say a electic fuel pump is it an advantage to usr bigger dia wire or can bigger pull more juice???? thanks in advance for any help bryan


novassdude 05-07-2010 03:09 PM

Re: Size of wire??
 
Do not forget the ground side of the wiring needs to be just as large as the power wire.

Mack Reeves 05-07-2010 05:38 PM

Re: Size of wire??
 
Quote:

Originally Posted by novassdude (Post 186251)
Do not forget the ground side of the wiring needs to be just as large as the power wire.

I also pull a large ground from the battery to a ground strip terminal and then pull to the other accessories. I don't trust just grounding to the frame...


All times are GMT -4. The time now is 03:59 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.