CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   82-92 Pinion Angle (https://classracer.com/classforum/showthread.php?t=26793)

Chad Rhodes 07-02-2010 10:05 PM
82-92 Pinion Angle
 
Any suggestions for a starting point on an 82-92 F-body Stocker

Billy Nees 07-03-2010 06:28 AM
Re: 82-92 Pinion Angle
 
That would depend on whether you are using the torque arm or the lower arm "ladderbar".
With the torque arm you will need less angle.

Chad Rhodes 07-03-2010 08:23 AM
Re: 82-92 Pinion Angle
 
Quote:
Originally Posted by Billy Nees (Post 195869)
That would depend on whether you are using the torque arm or the lower arm "ladderbar".
With the torque arm you will need less angle.
its got a torque arm, not a stock one though obviously

Billy Nees 07-03-2010 08:51 AM
Re: 82-92 Pinion Angle
 
If it's an adjustable arm , I would start with the same angle as the trans to driveshaft angle. With that long an arm you don't need much. If your trans to driveshaft is nil then I would go with about 2 or 3 down.

Chad Rhodes 07-03-2010 09:07 AM
Re: 82-92 Pinion Angle
 
thanks


All times are GMT -4. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.