SBF oil pump
 

anyone know a ford or aftermarket part number for the SBF oil pump relief spring cup? i've replaced the factory spring with a stiffer unit but can't find the proper sized cup that retaines it...

Re: SBF oil pump
 

This is the pump I run did alot of research. Melling 10687 has a threaded plug for the relief spring it also has support on on both sides of the gears shaft. Nice pump compared to what else is out there got mine from summit for about $50.

Re: SBF oil pump
 

Is it a gear pump or G Rotor?

Re: SBF oil pump
 

10/4 on the 10687 west coast. thankyou. (motor is a 302ci) i just have this mellings std. volume gear type pump new on the shelf and i'd like to move it...canton lists a higher pressure spring and the required type plug, they say it's a '69/'70 boss 302 plug. sometimes the simplest things turns into an aggravating situation....

Re: SBF oil pump
 

part # C20Z6A616A... 21/32" OD...NLA from ford.

Re: SBF oil pump
 

Blueoval Ralph it is a gearotor pump this one is a standard volume they do also make them in high volume.

Re: SBF oil pump
 

gearotor style...my mistake. 21/32" shallow plug found at the parts store. tapped gently to get the plug to start and snugged up the pickup tube & gasket into place. canton spring made 72lbs. pressure on the stand. (hyd. roller 302ci., street clearences w/shell 15/40 rotella T.)

Re: SBF oil pump
 

Dorman makes a replacement part - #555061 You can get them at rockauto.com