CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Body Height effecting Pinion Angle? (https://classracer.com/classforum/showthread.php?t=31803)

67champ 02-28-2011 09:22 AM

Body Height effecting Pinion Angle?
 
Does raising and lowering the height of the body over the rear tires on a leaf spring car (via longer/shorter shackles) change the pinion angle of the rear-end?

Thanks,
dt

Billy Nees 02-28-2011 09:30 AM

Re: Body Height effecting Pinion Angle?
 
Sure does!

67champ 02-28-2011 10:35 AM

Re: Body Height effecting Pinion Angle?
 
So, which does what??? :-)


dt

Billy Nees 02-28-2011 11:03 AM

Re: Body Height effecting Pinion Angle?
 
Generally, raising the car increases pinion angle.

Adger Smith 02-28-2011 11:08 AM

Re: Body Height effecting Pinion Angle?
 
Billy,
I'm surprised you didn't say: up is down and down is up. Or is it: down is up and up is down? :~)
There is some good info about suspensions here. I think he was an engineer with the Chrysler race teams in the early years when they used the SS spring setup and developed the 3 link. Hope it helps.

http://www.racetec.cc/shope/

67champ 02-28-2011 01:18 PM

Re: Body Height effecting Pinion Angle?
 
Thanks for the info!!!

d
t


All times are GMT -4. The time now is 12:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.