Alternator Mounting ??
 

Hey guys, im trying to mount an alternator on a 69 camaro w/ a small block. I would love to mount this low as to clean up the top of the engine. Im using a cs series delphi alt. And the low mount brackets i have do not allow frame clearance on driver or pass side. Im sure ive seen this done but cant come up with what brackets will work. The ultra mini alts dont really give more clearance because of the depth around 5 inch... anyone have a clue ?? thanks !! Roger

Re: Alternator Mounting ??
 

I use the low mount on my Nova (same frame) I had to make a couple of spacers and move the bracket out about 3/4 inch. I also reclocked the alternator to help clear the charging stud.

Re: Alternator Mounting ??
 

Novassdude,

send me your email address in a PM, I have some photos that might help.

Larry Woodfin

Re: Alternator Mounting ??
 

Check the Powermaster web site. This should help you out.

Re: Alternator Mounting ??
 

OOOPS, I mean Roger send your email in a PM, my bad.

Re: Alternator Mounting ??
 

Roger try Alan Grove.



Mid mount #235R might work.

http://i232.photobucket.com/albums/e...235R_Fixed.jpg

Here it is with a CS130, you can modify the wp tubes for different type pumps.

http://i232.photobucket.com/albums/e...tix/Alt004.jpg

Re: Alternator Mounting ??
 

I used a nice billet street rod piece from Jegs to mount a stock alternator.

Re: Alternator Mounting ??
 

Check out part # 981 at the bottom, sounds like what you are looking for.

Re: Alternator Mounting ??
 

Thank you guys for the help ! Ive got a bracket assembly coming that should fix me up. I appreciate the input !

Re: Alternator Mounting ??
 

Low mount alternator bracket

SKU: 102174 Part No: 1000

$57.95

Modern Performance Classics

1-800-457-NOVA

Talk to Rudy