CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Leaving crooked (https://classracer.com/classforum/showthread.php?t=34591)

Ron Gusack 07-11-2011 10:13 AM

Leaving crooked
 
The car jumps to the right at the hit. Like it's unloading the RR. It acted the same on both of the runs below, it's just hard to see from the side view. I haven't checked bar pre load yet.
Shocks are at 0-0
Tire pressure is even at 10lbs in 32x14's
Foot brake, leaving at 3
Ladder bar with sliders and mono leaf.
I appreciate any helpful opinions
http://www.youtube.com/watch?v=ymesPvW3MGg
http://www.youtube.com/watch?v=nSWbChnCyM4

Mike Pearson 07-11-2011 10:21 AM

Re: Leaving crooked
 
I would check the front holes on the ladder bar mounts real close. They are probably oblonged. Two different lanes same issue. If you have to have preload on your ladder bars there is something wrong with the car. Make sure there is no wear on any of the brackets or bolts. Then check to see if the rear is square in the car. My car was doing the same thing. worn brackets.

Ron Gusack 07-11-2011 10:19 PM

Re: Leaving crooked
 
Thanks Mike, I'm pretty sure the rear is square, but I haven't looked at the brackets and bolts in a long time.


All times are GMT -4. The time now is 10:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.