CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Cam # help ???? (https://classracer.com/classforum/showthread.php?t=37449)

danny waters sr 11-28-2011 08:22 AM
Cam # help ????
 
I have a Lunati small block chevy roller cam out of the superstocker and cannot find out what it is by the #'s on it. Can anyone help please.......There is one place with something on the end of cam that has been grind off. other than that here are the #'s on the end of cam below...........

119896

8C2A

Lunati....


Just need the lift and specs if possible////Thanks

Mike Taylor 3601 11-28-2011 01:52 PM
Re: Cam # help ????
 
Have you tried Lunati? If can't find out can have checked on cam doctor. You can measure lobe lift and maybe able to narrow down what lobes they are.
In case you don't know measure lobe both directions and difference is the lobe lift then multiply rocker ratio for lift @ valve.
Mike Taylor 3601

danny waters sr 11-28-2011 07:11 PM
Re: Cam # help ????
 
Quote:
Originally Posted by Mike Taylor 3601 (Post 295811)
Have you tried Lunati? If can't find out can have checked on cam doctor. You can measure lobe lift and maybe able to narrow down what lobes they are.
In case you don't know measure lobe both directions and difference is the lobe lift then multiply rocker ratio for lift @ valve.
Mike Taylor 3601
I went on line at Lunati and could not find it.... I was hoping someone had one like it on here and could tell me what it was.....

Thanks for the info

Alan Roehrich 11-28-2011 07:29 PM
Re: Cam # help ????
 
That appears to be a serial number, you'll probably have to call Lunati, and hope they still have the records.


All times are GMT -4. The time now is 12:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.