CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Stall speed (https://classracer.com/classforum/showthread.php?t=37599)

MEXJOE 12-06-2011 04:43 PM
Stall speed
 
What is a "normal" STALL SPEED for a combo like mine?
What would be considered High or Low?
325 hp 396
Peak TQ @ 4600 & HP @ 6000
Weight as run 3440
4.56 gear or 4.88

Billy Nees 12-06-2011 07:11 PM
Re: Stall speed
 
Well, if it were my deal, knowing those dyno numbers I'd be looking for about 44-4500 maybe a little less. But I'm no expert on big blocks.

Mark Yacavone 12-06-2011 09:06 PM
Re: Stall speed
 
......Usually right at or a couple 100 over peak torque.

Pvt Parts 12-06-2011 09:53 PM
Re: Stall speed
 
Quote:
Originally Posted by mark yacavone (Post 297411)
......usually right at or a couple 100 over peak torque.


x2

junior barns 12-07-2011 01:25 AM
Re: Stall speed
 
Quote:
Originally Posted by MEXJOE (Post 297354)
What is a "normal" STALL SPEED for a combo like mine?
What would be considered High or Low?
325 hp 396
Peak TQ @ 4600 & HP @ 6000
Weight as run 3440
4.56 gear or 4.88
gear might be a bit much? Which might change flash or stall?

Ultimate Converter Concepts 12-07-2011 09:07 AM
Re: Stall speed
 
Quote:
Originally Posted by mark yacavone (Post 297411)
......usually right at or a couple 100 over peak torque.
x3


All times are GMT -4. The time now is 07:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.