CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   MS 1110H bearings ? (https://classracer.com/classforum/showthread.php?t=40755)

rod 05-13-2012 07:05 PM

MS 1110H bearings ?
 
please tell me more about these bearings. are these real bearings or just spacers. $206 seems like a lot for a set of mains. however, to be able to use a 4 bolt block......
is it possible to use a set of stock 350 main bearings [in a 350 block], have them honed and then use the small journal main bearing on them?
thoughts or ideas
thanks rod in AZ

JRyan 05-13-2012 07:51 PM

Re: MS 1110H bearings ?
 
Rod, the MS1110H bearings are the special double thick one-piece bearing that you can bolt directly into your 4-bolt block with a small journal crank.

Jerry

BillK 05-13-2012 09:03 PM

Re: MS 1110H bearings ?
 
Quote:

Originally Posted by rod (Post 326339)
is it possible to use a set of stock 350 main bearings [in a 350 block], have them honed and then use the small journal main bearing on them?
thoughts or ideas
thanks rod in AZ

Rod,
By the time you go through all of that, you will have spent a lot more than just buying the $200 set of bearings, plus I have never liked the idea of bearing spacers or stacking them like you are thinking of doing. I know guys did it for ages on the 400 blocks with a 350 crank, but why take the chance of having two things in each postition that can move around ??

Just my opinion,

NWDragracing 05-14-2012 08:46 AM

Re: MS 1110H bearings ?
 
Shop around, especially in Ebay.

http://compare.ebay.com/like/120872007691?var=lv<yp=AllFixedPriceItemTypes&var= sbar&_lwgsi=y&cbt=y

bert powell 05-14-2012 12:20 PM

Re: MS 1110H bearings ?
 
Don't want to highjack the thread but do they maqke these for a bbc? Like to use a 409 main journal in a 454 block?

rod 05-20-2012 08:39 PM

Re: MS 1110H bearings ?
 
i looked at the pictures on e-bay. there are 12 pieces there. what are the copper shells for? they look like inserts for the rear main. right or wrong?

thanks for all the replies
rod in AZ

JRyan 05-20-2012 10:50 PM

Re: MS 1110H bearings ?
 
Rod,

Yes, the rear main uses a spacer on the MS1110-H.

Jerry

FED 387 05-20-2012 11:41 PM

Re: MS 1110H bearings ?
 
My experience issome of them are fully grooved depending on if you get "newer stock or older stock"---they only come in 3 sizes so if ya cut the crank more than .010 ya cant use em ----and yes the rear main uses a spacer---very expensive about $170-200 depending on who ya get em from----FED387

firebird 05-31-2012 07:40 PM

Re: MS 1110H bearings ?
 
I just got my clevite mains---is there any instruction on the rear main spacer--like loctite or? i would like your expertise please--thanks--spacers make me nervous

Alan Roehrich 05-31-2012 07:50 PM

Re: MS 1110H bearings ?
 
Never use Loctite on a bearing, it inhibits heat transfer, and slightly alters the fit.


All times are GMT -4. The time now is 06:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.