santhuff / control arm modification question
 

Does anyone have a picture of what needs to be cut on 69 camaro control arms to use Santhuff shocks???

Re: santhuff / control arm modification question
 

I dont have a picture. I used a hole saw to cut out the entire center of the a arm then I welded in 2 new tabs to bolt the shock to. The shock needs to move outward to give enough room for the adjustment knob at the bottom of the shock. I pulled the a arms out to do the mods. I also used the bracket supplied by Santhuff for the lower mount to the a arm. It was a pretty easy install if you can weld and fabricate. you will also need a snubber so the shocks will not extend too far. Great shocks. They will absolutly control the front end bounce.