CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   bump steer question (https://classracer.com/classforum/showthread.php?t=41703)

dussault.racing 07-05-2012 05:15 PM
bump steer question
 
I did some searching with no strait answer....
Im setting up the front end of my 69 camaro for stock. Does NHRA alow the bump steer kits in stock now and if not are the longer tie rods with the billet collars accepted???

Greg Hill 07-05-2012 05:47 PM
Re: bump steer question
 
Quote:
Originally Posted by dussault.racing (Post 334162)
I did some searching with no strait answer....
Im setting up the front end of my 69 camaro for stock. Does NHRA alow the bump steer kits in stock now and if not are the longer tie rods with the billet collars accepted???
You can now use the bump steer kits with hemi joints for tie rod ends.I meant to say heim joints.

dussault.racing 07-06-2012 08:13 AM
Re: bump steer question
 
Whats the best kit???

B Aceves 07-06-2012 11:50 AM
Re: bump steer question
 
Quote:
Originally Posted by dussault.racing (Post 334217)
Whats the best kit???
works just fine !
http://www.jegs.com/i/Baer-Brake/136...rentProductId=

Brandon Altstadt 07-20-2012 01:22 PM
Re: bump steer question
 
Quote:
Originally Posted by b aceves (Post 334248)
x2

dussault.racing 07-23-2012 01:29 PM
Re: bump steer question
 
Thanks i just got them in, nice pieces!!!

Mike Savelle 07-25-2012 05:29 PM
Re: bump steer question
 
where would i get a kit for a 3 rd gen Camaro or does the first gen work on it ?

dussault.racing 07-27-2012 07:22 PM
Re: bump steer question
 
Quote:
Originally Posted by Mike Savelle (Post 337299)
where would i get a kit for a 3 rd gen Camaro or does the first gen work on it ?
Spohn performance

Mike Savelle 07-28-2012 04:46 PM
Re: bump steer question
 
thanks ,,, i thought i asked a hard question and nobody knew the answer

FrankM 07-30-2012 07:15 AM
Re: bump steer question
 
Ed Quay makes them for 3rd gen camaros. He has great stuff and everything fits.


All times are GMT -4. The time now is 03:57 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.