80 Dodge PU Stocker/71 Dart Bracket/SS
 

80 Dodge 150 Short Bed Pickup. M/N/O/P/ Stock Around 6 Different Good
Engine Combos 318/360. Almost exact clone of my 1.30 plus under 86 Truck.
New Pettis Machined 360 (.030). Custom Moroso front suspension, Trick Rear with New
Calvert Springs/Bars/Shocks. Moser 5.13 Spool and 35 Spline MW Axles.Brand New
Turbine Bronze paint(Original Color) on 40,000 Adventure SE 360HP Ralley Dash Truck.
Truck with Very Nice Body. New NOS Front Sheetmetal (Complete and Light)
Fenders,Bumper,Hood,Grille,Taillights are all new. New Interior and PainlessWiring
and Autometer Gauges ( Needs some finishing). New MSD BilletDistributor and.6AL.
You could part this truck out for more and it is cheap enough to use as a bracket car.
Clean Title. Sits low / slick looking! Engine is Running in Truck.
Hooker Coated Headers. Includes my latest cam. Has a manual 727/8inch
converter. Choice of Centerline or Welds with Front runners/ 9.0 Goodyears
all used but useable. Pro Stick shifter. Manual Steering Brakes. New Fuel Cell and lines.
Nice Custom S/W Rollbar that goes above Glass Window for good vision.

Here is you chance to go Stock Eliminator racing with a proven Combo for
Only $ 5,950.00 Firm and a couple weekend work. There is not a Full size
Dodge Truck in stock that is not Fast!! You could not buy a stock street truck for this number.
MY last one ran 1.30 plus under at NHRA races and faster in Testing!
$4,750 without Rear End (No3rd member Housing Springs,Bars)

$3,950 Without Rear,Race Wheels /Tires/ MSD.

$2,950 Without above and No Engine/Trans/Coated Headers if you have your own.

$2,500 Less Fuel System/Painless Wiring/Gauges
I might let someone finish this up entirely at my expense and run it next season if
they are local without them spending a dime!
Unlimited Tech support and we know these combos. Includes my new latest cam and good working converter

Also 71 Dart Swinger Project.....Nice Rustfree Remarkablylazer straight with Clean Utah Title
New Strange 9" Narrow rear end with 4.30 spool/35 sp. axles
New Calvert Springs and Bars moved into frame for 14/32's Tubs nicely done!
New S/W Cage still in Box. All trim Grille Bumper are quite nice!
Manual Steering/Manual Disc brakes Project Car could be finished in a couple Weeks.
$2,500.00 or $ 1,500.00 Less rearend/Springs Body Complete Rolling $950.00 Clean Title.
Includes Radiator and Driveshaft. Glass is Perfect/Windshield Perfect but removed for Cage Install.
Body is LAZER STRAIGHT and has been stored 30 years Media Blasted and primered!
As clean underneath as on Top! NO Rust ever or Bondo!! Hooker Headers Big or Small Block.
This is STUPID Cheap...Suspension/Tubs are installed. Also New in Crate VHF
Glass Hood Included! Rear End and Suspension cost more than I want for this clean car! New Centerlines and Goodyear 13x31s
Really just need the room in the shop and do not feel well enough to finish it!
Pictures on Craiglist Las Vegas ---- Search Dodge Dart
Racer7411@yahoo.com
DART BODY SOLD AS ROLLER!! THANKS FOR THE CALLS!!

Re: 80 Dodge PU Stocker/71 Dart Bracket/SS
 

Just shot you an email, John. Hope we can do some business :)

Re: 80 Dodge PU Stocker/71 Dart Bracket/SS
 

Would you send it again.......I do not see it!

Racer7411@yahoo.com

Thanks

Re: 80 Dodge PU Stocker/71 Dart Bracket/SS
 

John,
I sent you a follow up email with some additional questions.
please let me know if you received it.
Thanks
Mike

Re: 80 Dodge PU Stocker/71 Dart Bracket/SS
 

Found the second response. I will send you my phone # when
I am back in the States next week. I think that would be easier
as I am a sloooooow texter!
Thanks for the Interest!
Dart is Sold and Gone.