CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   BG 280... Anybody runnin' one with success? (https://classracer.com/classforum/showthread.php?t=46382)

brent flynn 03-21-2013 06:47 AM

BG 280... Anybody runnin' one with success?
 
Anybody runnin' a BG280, with success? Ive heard bad things about BG pumps, but i dont know why people having problems... I have one, that i was going to send in to have serviced @ Product Engineering(?) ... i have the # in my other phone...hehe Lemme know your thoughts... THanks, Brent

randy wilson 03-21-2013 07:21 AM

Re: BG 280... Anybody runnin' one with success?
 
Ran one on our SS\CS motor for years. No problems. Just to be safe, had it rebuilt, and installed on a deuce.

Mike Taylor 3601 03-21-2013 09:07 AM

Re: BG 280... Anybody runnin' one with success?
 
guy give me address to www.allcarbs.com said had all pieces for bg pumps.
Mike Taylor 3601

Mike Pearson 03-21-2013 12:38 PM

Re: BG 280... Anybody runnin' one with success?
 
Ninja Fuel Systems in GA sells the seal kits on line thru e bay. Just bought 2 and rebuilt one pump. By looking at it seemed like a well built pump. You have to knock out the sleeve that the rotor runs on to access the shaft seal. 13$ for the seal kit.

Todd Hoven 03-21-2013 03:02 PM

Re: BG 280... Anybody runnin' one with success?
 
I had a brand new one from the mid 90's . Lost pressure, replaced it with a new one. It wore the bottom plate in 3 months, the next one leaked, and the next one replaced under warrantee wore another plate out and sent metal through my whole fuel system and carb. I wouldn't run one of those pumps on a porta John service truck. If you have to run that type of fuel system buy a Holley or Summit race black pump.
Aermotive or Magna fuel is the only way to go, but they are not in everybody's budget.

brent flynn 03-21-2013 06:24 PM

Re: BG 280... Anybody runnin' one with success?
 
Ive heard some of those bad things about them... I have one , that looks good... but havent tore into it... My brother gave it to me...he bought it in 2005, at a swap meet. We hadnt heard anything about them, at the time... Wasnt sure if it was worth having checked out... figured i'd get the system plumbed for the bigger pump and return line, from the regulator. May run it a few times, first...hehe

Jeff Lee 03-21-2013 10:12 PM

Re: BG 280... Anybody runnin' one with success?
 
I've owned two that I bought for two different race cars. Both leaked right off the bat. Personally, I think BG makes crap parts, carbs, pumps. That's my opinion and I'm sticking to it! :p

brent flynn 03-21-2013 10:17 PM

Re: BG 280... Anybody runnin' one with success?
 
Anybody wanna buy a BG 280? ;)


All times are GMT -4. The time now is 06:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.