CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Question about minimum weight (https://classracer.com/classforum/showthread.php?t=46581)

68Mustang 04-02-2013 11:11 AM
Question about minimum weight
 
If you run a 67/68 mustang coupe in D/SA with a 390 what is the minimum weight

HR9121 04-02-2013 12:43 PM
Re: Question about minimum weight
 
3238

vic guilmino 04-02-2013 12:55 PM
Re: Question about minimum weight
 
1967-3200
1968-3165

Rory McNeil 04-02-2013 01:57 PM
Re: Question about minimum weight
 
Also, keep in mind there are different HP factors between the iron and Edelbrock heads. I also believe that the 68 can not use the aluminum intake and larger Holley carb that the 67 is allowed.

Rusty Gillis 04-02-2013 05:52 PM
Re: Question about minimum weight
 
Aluminum heads weight with driver

1967 3277
1968 3239

HR9121 04-02-2013 09:23 PM
Re: Question about minimum weight
 
Quote:
Originally Posted by Rusty Gillis (Post 376142)
Aluminum heads weight with driver

1967 3277
1968 3239
I did the aluminum heads but you are correct I failed to round up.

Jeff Lee 04-03-2013 01:21 PM
Re: Question about minimum weight
 
NHRA will allow you to round DOWN to the nearest 5#'s.
So you would show 3275 or 3235 on your weight stickers.


All times are GMT -4. The time now is 03:45 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.